TH48-E70 Petroleum Transmission and TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train Packages Caterpillar


Torque Converter Housing

Usage:

TH48-E70 JGC



Illustration 1g01714380

(1) Apply 5p-3413 Pipe Sealant to 5P-2937 O-Ring Adapter before you mount the torque converter housing to the transmission case.

(2) Apply 9S-3263 Thread Lock Compound to the 0T-0320 Bolts. Torque the 0T-0320 Bolt to the following torque. ... 70 ± 15 N·m (52 ± 11 lb ft)

(3) Apply 155-0695 Thread Lock Compound to the 0S-1587 Bolts. Torque the 0S-1587 Bolts to the following torque. ... 105 ± 20 N·m (77 ± 15 lb ft)

(4) Apply 155-0695 Thread Lock Compound to the 0T-0065 Bolts. Torque the 0T-0065 Bolts to the following torque. ... 47 ± 9 N·m (35 ± 7 lb ft)

Caterpillar Information System:

C11 and C13 Engines and 14M and 16M Motor Graders Retarder - Test
3524B and C175 Engines for Off-Highway Truck/Tractors Engine Design
Main Termination Blocks on Gensets{7553} Main Termination Blocks on Gensets{7553}
C15 and C18 Petrolem Generator Set Engines Coolant Contains Oil
2013/08/21 Improved Software for Caterpillar Digital Voltage Regulator (CDVR) Now Available {4467, 7620}
C15 On-Highway Engine Belt Tensioner
CX28 On-Highway Transmission Power Train Pressures
CX28 On-Highway Transmission Relief Valve (Transmission Hydraulic Control) - Test and Adjust
C13 On-highway Engine Engine Oil Pump
G3520C and G3520E Generator Set Engines Engine Speed - Test
G3520C and G3520E Engines Flywheel Housing
G3520C and G3520E Generator Set Engines Sensor Supply - Test
TH48-E70 Petroleum Transmission and TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train Packages Torque Converter
C175-16 and C175-20 Generator Set Engines Oil Pump
C4.4 Industrial Engine Fuel Injection Nozzles
TH48-E70 Petroleum Transmission and TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train Packages Transmission Hydraulic Control
C15 On-Highway Engine Engine Oil Cooler
G3600 Engines After Starting Engine
C15 On-Highway Engine Exhaust Manifold Shield
3608 Engine Engine Support - Remove and Install
2006/12/04 Replacement Bearings are Listed {1230}
C175-16 and C175-20 Generator Set Engines Oil Filter Differential Pressure Problem
C175-16 and C175-20 Generator Set Engines Fuel Rail Pressure Is Low
3608 Engine Mounting Isolator - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.