| NOTICE |
|---|
Do not use any caustic (corrosive) materials in order to clean any parts of this group. Caustic materials will cause corrosion and damage to the parts. |
 | |
| Illustration 1 | g01697073 |
Back View | |
(1) Torque for the two bolts ... 35 ± 7.5 N·m (25.8 ± 5.5 lb ft)
(2) Lubricate the seals lightly with lubricant that is being sealed.
(3) Torque for the plug ... 45 ± 7.5 N·m (33.2 ± 5.5 lb ft)
 | |
| Illustration 2 | g01697156 |
(4) Torque for the hose assembly ... 25 ± 3 N·m (18.4 ± 2.2 lb ft)
(5) Torque for the harness assembly ... 9 ± 1 N·m (6.6 ± 0.74 lb ft)
Note: For more information, refer to Specifications, "Modulating Valve (Transmission Hydraulic Control)".
(6) 310-9344 Valve Group
All of the valves in this group must be tested as a unit. All of the valves in this group must be assembled into the transmission as a unit. Individual parts of this unit may not be interchanged at any time after the unit has been tested. During repair service, individual parts of this group will be furnished.
| NOTICE |
|---|
Do not use any caustic (corrosive) materials in order to clean any parts of this group. Caustic materials will cause corrosion and damage to the parts. |