Electronic Control Module (ECM) - Configure
Follow these instructions to get to the configuration screen:
- Connect the communications adapter and the computer to the diagnostic service tool connector.
- Start the Caterpillar Electronic Technician (Cat ET).
- Select "File". Go to "Select ECM". Choose the "Implement Control".
- Go to the "Service" Menu. Select "Configurations". Click "OK". Certain operations or characteristics can be changed.
Configuration Screen
Show/hide table
Illustration 1 | g02624017 |
Cat ET Configuration screen |
Caterpillar Information System:
854K Wheel Dozer Electrohydraulic System Electronic Control Module (ECM) - Flash Program
966M and 972M Wheel Loaders Visibility Information
992K Wheel Loader and 854K Wheel Dozer Power Train Torque Converter and Pump Drive Housing
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Transmission Hydraulic Control Valve - Disassemble - Tractor
992K Wheel Loader Electrohydraulic System MID 082 - CID 1326 - FMI 02
992K Wheel Loader Electrohydraulic System MID 082 - CID 0967 - FMI 14
992K Wheel Loader Electrohydraulic System MID 082 - CID 0967 - FMI 09
992K Wheel Loader and 854K Wheel Dozer Power Train Torque Converter and Transmission Pressures
Weld Repair Procedure for 990H Wheel Loader Main Hydraulic Tank{0679, 5056, 5068} Weld Repair Procedure for 990H Wheel Loader Main Hydraulic Tank{0679, 5056, 5068}
992K Wheel Loader and 854K Wheel Dozer Steering System Secondary Steering System - If Equipped
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Flywheel Scavenge Pump - Assemble - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Flywheel Scavenge Pump - Disassemble - Tractor
924K, 930K and 938K Wheel Loaders Electrohydraulic System Gear Pump (Hydraulic Fan)
854K Wheel Dozer Electrohydraulic System Pilot Control Actuator Current (Proportional Solenoid) - Check
854K Wheel Dozer High Pressure Screens - Clean/Replace - If Equipped
854K Wheel Dozer Electrohydraulic System System Pressure - Release
854K Wheel Dozer Electrohydraulic System Pressure Tap Locations
854K Wheel Dozer Electrohydraulic System Lift Double Stall Speed with Stall Detection (Electronic Technician) - Check
D9T Track-Type Tractor Machine Systems Pilot Control Valve - Remove and Install
Product Link - PL522/523 MID 161 - CID 3766- FMI 14
854K Wheel Dozer Electrohydraulic System Pressure Reducing Valve Pressure for Dead Engine Pilot Supply (Engine OFF) - Test and Adjust
854K Wheel Dozer Electrohydraulic System Pilot Control Actuator Pressure - Check
D9T Track-Type Tractor Power Train Torque Converter Outlet Relief Valve - Remove
992K Wheel Loader Electrohydraulic System Ride Control Signal Pressure - Check