Pilot Control Valve - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | FT-1114     | 真空舱     | 1     |
5P-0306 | 真空传感器     | 1     | |
6V-4142 | 接头     | 1     | |
5K-5068 | 接头     | 1     | |
B     | 185-3630     | 带式扳手组件     | 1     |
开始:
- 释放液压系统压力。 请参阅拆解和组装, "液压系统压力 - 释放"。
注: 在所有软管、所有软管组件、所有导线及所有管组件上作出识别标记,以便安装。 插接好所有软管组件和所有管组件。 这将有助于防止液体渗漏,并有助于防止污物进入系统。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 拆下地板。
- 将工具 (A) 连接到液压油箱 (1) 。 将 345 kPa (50 psi) 的气压施加到工具 (A) 上。
Show/hide table
图 1 | g01095103 |
- 断开线束组件 (2) 。
Show/hide table
图 2 | g02670596 |
- 拆下蓄能器 (3) 。
- 断开软管组件 (4) 和 (6) 。
- 拆下控制歧管 (5) 。
安装步骤
- 按与拆卸相反的顺序安装先导控制阀。
Caterpillar Information System:
854K Wheel Dozer Electrohydraulic System Lift Double Stall Speed with Stall Detection (Electronic Technician) - Check
854K Wheel Dozer Electrohydraulic System Pressure Tap Locations
854K Wheel Dozer Electrohydraulic System System Pressure - Release
854K Wheel Dozer High Pressure Screens - Clean/Replace - If Equipped
854K Wheel Dozer Electrohydraulic System Pilot Control Actuator Current (Proportional Solenoid) - Check
924K, 930K and 938K Wheel Loaders Electrohydraulic System Gear Pump (Hydraulic Fan)
854K Wheel Dozer Electrohydraulic System Electronic Control Module (ECM) - Configure
854K Wheel Dozer Electrohydraulic System Electronic Control Module (ECM) - Flash Program
966M and 972M Wheel Loaders Visibility Information
992K Wheel Loader and 854K Wheel Dozer Power Train Torque Converter and Pump Drive Housing
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Transmission Hydraulic Control Valve - Disassemble - Tractor
992K Wheel Loader Electrohydraulic System MID 082 - CID 1326 - FMI 02
Product Link - PL522/523 MID 161 - CID 3766- FMI 14
854K Wheel Dozer Electrohydraulic System Pressure Reducing Valve Pressure for Dead Engine Pilot Supply (Engine OFF) - Test and Adjust
854K Wheel Dozer Electrohydraulic System Pilot Control Actuator Pressure - Check
D9T Track-Type Tractor Power Train Torque Converter Outlet Relief Valve - Remove
992K Wheel Loader Electrohydraulic System Ride Control Signal Pressure - Check
992K Wheel Loader Electrohydraulic System Piston Pump (Implement) Main Relief Valve Pressure - Test and Adjust
D9T Track-Type Tractor Power Train Torque Converter Outlet Relief Valve - Install
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Battery - Remove and Install - Scraper
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Nozzle Heater Harness - Remove and Install - Scraper
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Combustion Head - Remove and Install - Scraper
D9T Track-Type Tractor Power Train Main Drive Shaft - Remove and Install
621H, 623H and 627H Wheel Tractor-Scrapers Machine Systems Piston Pump (Cushion-Hitch) - Disassemble