Torque Converter and Pump Drive Housing
Show/hide table
| |
| Illustration 1 | g06218667 |
|
Rear view Typical example | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 1 | 1 | 164-5567 Quick Disconnect Coupler As | Torque to |
| 2 | 1 | 6V-2406 O-Ring Seal | Before assembly, lubricate the O-ring seals with the lubricant that is being sealed. |
| 3 | 1 | 9H-6832 O-Ring Seal | Before assembly, lubricate the O-ring seals with the lubricant that is being sealed. |
| 4 | 1 | 5P-9035 O-Ring Seal | Before assembly, lubricate the O-ring seals with the lubricant that is being sealed. |
Show/hide table
| |
| Illustration 2 | g06218675 |
|
Section B-B | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 5 | - | - | Install the lip type seal until the lip type seal is flush with the face of the bearing cup within a distance of |
| 6 | 3 | 277-8995 Lip Type Seal | Before assembly, lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 7 | 1 | 281-2211 Shim Pack | As required, use the following shim pack to obtain a bearing end play of Thickness of the shim pack is |
| 8 | 4 | 2M-3340 O-Ring Seal | Before assembly, lubricate the O-ring seals with the lubricant that is being sealed. |
| 9 | 2 | 111-4486 Shim Pack | As required, use the following shim pack to obtain a bearing end play of Thickness of the shim pack is |
| 10 | 1 | 289-9352 Pump Adapter | Before assembly, lubricate threads with the lubricant that is being sealed. |
Caterpillar Information System:
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Transmission Hydraulic Control Valve - Disassemble - Tractor
992K Wheel Loader Electrohydraulic System MID 082 - CID 1326 - FMI 02
992K Wheel Loader Electrohydraulic System MID 082 - CID 0967 - FMI 14
992K Wheel Loader Electrohydraulic System MID 082 - CID 0967 - FMI 09
992K Wheel Loader and 854K Wheel Dozer Power Train Torque Converter and Transmission Pressures
Weld Repair Procedure for 990H Wheel Loader Main Hydraulic Tank{0679, 5056, 5068} Weld Repair Procedure for 990H Wheel Loader Main Hydraulic Tank{0679, 5056, 5068}
992K Wheel Loader and 854K Wheel Dozer Steering System Secondary Steering System - If Equipped
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Flywheel Scavenge Pump - Assemble - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Flywheel Scavenge Pump - Disassemble - Tractor
950K Wheel Loader and 962K Wheel Loader Braking and Hydraulic Fan System Parking Brake
950K Wheel Loader and 962K Wheel Loader Power Train STIC Control
D3K2, D4K2 and D5K2 Track-Type Tractors Machine Systems Decelerator and Brake Control
966M and 972M Wheel Loaders Visibility Information
854K Wheel Dozer Electrohydraulic System Electronic Control Module (ECM) - Flash Program
854K Wheel Dozer Electrohydraulic System Electronic Control Module (ECM) - Configure
924K, 930K and 938K Wheel Loaders Electrohydraulic System Gear Pump (Hydraulic Fan)
854K Wheel Dozer Electrohydraulic System Pilot Control Actuator Current (Proportional Solenoid) - Check
854K Wheel Dozer High Pressure Screens - Clean/Replace - If Equipped
854K Wheel Dozer Electrohydraulic System System Pressure - Release
854K Wheel Dozer Electrohydraulic System Pressure Tap Locations
854K Wheel Dozer Electrohydraulic System Lift Double Stall Speed with Stall Detection (Electronic Technician) - Check
D9T Track-Type Tractor Machine Systems Pilot Control Valve - Remove and Install
Product Link - PL522/523 MID 161 - CID 3766- FMI 14
854K Wheel Dozer Electrohydraulic System Pressure Reducing Valve Pressure for Dead Engine Pilot Supply (Engine OFF) - Test and Adjust