Illustration 1 | g02706422 |
Pressure taps are located under the access doors on the platform |
Illustration 2 | g02706509 |
Remote pressure taps located under the hinge for the access door on the platform (1) Lockup clutch pressure tap (If equipped) (2) Impeller clutch pressure tap |
Illustration 3 | g02706562 |
View of the Input Transfer Gear (3) Transmission lubrication pressure tap |
Illustration 4 | g02706580 |
(4) Speed clutch pressure tap (5) Directional clutch pressure tap (6a) Torque converter inlet pressure tap on the transmission (7) Oil pump output pressure tap |
Illustration 5 | g02706578 |
Rear view of the torque converter housing (6b) Torque converter inlet pressure tap on the torque converter (8) Torque converter outlet pressure tap (9) Hose connection for the lockup clutch pressure tap (If equipped) (10) Hose connection for the impeller clutch pressure tap |
The following pressures should be checked with the engine at high idle. The transmission oil should be at the normal operating temperature of 95 ± 15 °C (203 ± 27 °F).
(1) Control pressure of the lockup clutch
- Lockup clutch pressure with the lockup clutch engaged ... 2034 ± 69 kPa (295 ± 10 psi)
- Lockup clutch pressure with the lockup clutch disengaged ... 0 kPa (0 psi)
(2) Control pressure of the impeller clutch
- Impeller clutch pressure with the left brake pedal fully disengaged. ... 2068 ± 207 kPa (300 ± 30 psi)
- Impeller clutch pressure with the left brake pedal fully engaged. ... 621 ± 138 kPa (90 ± 20 psi)
(3) Minimum pressure for the transmission lubrication oil ... 69 kPa (10 psi)
(4) Speed clutch pressure ... 2550 ± 138 kPa (370 ± 20 psi)
(5) Directional clutch pressure ... 2170 ± 138 kPa (315 ± 20 psi)
(6) Torque converter inlet pressure ... 758 ± 103 kPa (110 ± 15 psi)
(7) Oil pump output pressure ... 2550 ± 138 kPa (370 ± 20 psi)
(8) Torque converter outlet pressure ... 552 ± 34 kPa (80 ± 5 psi)