Calibration of the ECPC Valves on Well Servicing OEM Transmissions {3073, 3139, 3167, 4800, 4808, 7000}
- Transmission:
- TH31 (S/N: LAD1-UP; SKY1-UP)
- TH35 (S/N: PZT1-UP; TZM1-UP)
The ECPC control valve system on the TH31 and TH35 Well Servicing OEM Transmissions should be calibrated after you perform the following procedures:
- The transmission has been repaired.
- The transmission has been rebuilt.
- A valve has been replaced.
- A wiring harness has been replaced.
- An ECM has been replaced.
- The transmission has been coupled to an engine.
Caterpillar Information System:
C175-16 and C175-20 Generator Set Engines Fan Drive
2006/11/27 The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys DC Disconnect Switch Handle
C280-12 and C280–16 Marine Engines Mounting Isolator - Remove and Install
C6.6 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
C9 On-highway Engine Exhaust Combustion Group - Aftertreatment Regeneration Device
3606 and 3608 Engines Engine Support - Remove and Install
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys APS Controller PWA
3500B Industrial Engine Refill Capacities and Recommendations
390F Excavator Machine Systems Travel Motor - Assemble
C9 Engines for Caterpillar Built Machines Engine Design
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Keyswitch/EMO Panel
3612 and 3616 Engines Air Lubricator - Remove and Install
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys DC Disconnect Indicator
3612 and 3616 Engines Air Starting Motor Silencer - Remove and Install
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Power Distribution PWA
3612 and 3616 Engines Air Starting Motor - Remove
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys 24V Power Supply
C175-16 and C175-20 Generator Set Engines Fuel Lines
3612 and 3616 Engines Air Starting Motor - Disassemble
G3508, G3512 and G3516 Engines Electric Starting Motor - Remove and Install
Inspection and Repair Procedure to Replace the Studs for the Rocker Arm Shaft{1102} Inspection and Repair Procedure to Replace the Studs for the Rocker Arm Shaft{1102}
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Dual Network Interface PWA (Flywheel Cabinet)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys General Purpose Interface PWA (Flywheel Cabinet)