Camshaft
Show/hide table
Illustration 1 | g01302906 |
(1) Bolt |
(2) Torque for four bolts ...
Show/hide table
Illustration 2 | g01368662 |
(3) Exhaust lobe
(4) Injector lobe (5) Inlet lobe |
(6) Diameter of camshaft journals ...
Show/hide table
Illustration 3 | g01320163 |
(A) The camshaft lobe lift
To find the lobe lift, use the following procedure:
- Measure the camshaft lobe height (B) that is the maximum distance from the base diameter of the camshaft lobe.
- Measure the base circle (C).
- Subtract the base circle measurement in Step 2 from the camshaft lobe height in Step 1. The difference is the actual lobe lift (A).
- Specified camshaft lobe lift (A)
Exhaust lobe ...
9.417 mm (0.3707 inch) Injector lobe ...
14.285 mm (0.5624 inch) Inlet lobe ...
12.607 mm (0.4963 inch)
The maximum permissible difference between the actual lobe lift in Step 3 and the specified lobe lift in Step 4 is
Caterpillar Information System:
2006/07/24 A New Speed-Timing Sensor Is Available {1912}
2006/07/24 A New Speed-Timing Sensor is Available {1912}
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Display Interface PWA
C280 Marine Auxiliary Engines Emergency Stop Switch
2006/06/26 Hole in the Turbine Housing of the Turbocharger {1052}
TH48-E70 Petroleum Transmission Magnetic Screen (Transmission) - Clean
C13 On-highway Engine Exhaust Manifold
Storage and Troubleshooting for the Vacuum Pump {4287} Storage and Troubleshooting for the Vacuum Pump {4287}
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Contactor (K3, K4)
C280 Marine Auxiliary Engines Fuel Injection Enable
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Filter Inductors
3116 and 3126 Truck Engines Inlet Manifold - Install
C13 On-highway Engine Engine Oil Pan
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Graphics Master PWA (GM)
C13 On-highway Engine Exhaust Extension
C13 and C15 On-Highway Engines Fire Prevention and Explosion Prevention
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Front Panel Display
C4.4 Industrial Engine Valve Depth - Inspect
C280 Marine Auxiliary Engines Engine Cranks but Will Not Start
C280 Marine Auxiliary Engines Engine Misfires, Runs Rough or Is Unstable
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Local EPO/EMO Button
C280 Marine Auxiliary Engines Intermittent Engine Shutdown
Metal Shavings in the Hydraulic Electronic Unit Injector (HEUI) Oil Passages{1250, 1274} Metal Shavings in the Hydraulic Electronic Unit Injector (HEUI) Oil Passages{1250, 1274}
2006/10/30 New Marine Software Is Now Available {1901, 1902, 7490, 7620}