- Caterpillar Products
- Machines with Grease Lubricated Track with Swage
- Machines with Greased Lubricated Track (GLT)
- Machines with Positive Pin Retention (PPR) Track
- Machines with Positive Pin Retention 2 (PPR2) Track
- Machines with Rotating Bushing Track
- Machines with Sealed Positive Pin Retention (PPR) Track
- Machines with Sealed Track
- Machines with Sleeve Bearing Track
- Machines with SystemOne Undercarriage
- Machines with non-PPR Sealed and Lubricated Track
- Machines with Greased Lubricated Track (GLT)
Introduction
Revision | Summary of Changes in SEBF8575 |
23 | Added serial number prefixes for New Product Introduction. |
21–22 | Added serial number prefixes for New Product Introduction. |
20 | Added serial number prefixes for New Product Introduction.
Added Sales Model 323F, 538B, 318D2, and 320F. Added serial number prefixes for New Product Introduction. Added Sales Model 6015B. |
19 | Added serial number prefixes for New Product Introduction.
Added Sales Model 6015B. |
18 | Added serial number prefixes for New Product Introduction.
Added Sales Model D6K2 along with Carrier Rollers Groups |
© 2019 Caterpillar All Rights Reserved. This guideline is for the use of Caterpillar dealers only. Unauthorized use of this document or the proprietary processes therein without permission may be violation of intellectual property law. Information contained in this document is considered Caterpillar: Confidential Yellow.
This Undercarriage Reconditioning Guide contains the necessary information to allow a dealer to establish a parts reusability program. Reuse and salvage information enables Caterpillar dealers and customers to benefit from cost reductions. Every effort has been made to provide the most current information that is known to Caterpillar. Continuing improvement and advancement of product design might have caused changes to your product which are not included in this publication. This Undercarriage Reconditioning Guide must be used with the latest technical information that is available from Caterpillar.
For technical questions when using this document, work with your Dealer Technical Communicator (TC).
To report suspected errors, inaccuracies, or suggestions regarding the document, submit a form for feedback in the Service Information System (SIS Web) interface.
Summary
Illustration 1 | g02139237 |
The following table has the required oil capacity, oil weight, and Caterpillar oil part number for carrier rollers. The carrier roller assembly part numbers and group numbers are also included.
Safety
Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs. A person must be alert to potential hazards. This person should also have the necessary training, skills, and tools to perform these functions properly.
This bulletin may contain hazardous steps. A safety alert symbol like the ones below is used to identify a hazard.
Warning messages identify a specific, imminent, latent, hazard that has a reasonable probability of resulting in personal injury or death if the warning is ignored.
Inspect all threaded components before use. Damaged threads may fail under hydraulic pressure. Broken threads may release flying objects that are propelled with great force. Personal injury or death can occur if struck by flying objects. |
Do not stand near the hydraulic press while the press is in operation. A component that slips or breaks under pressure may fly into the air with great force. Personal injury or death can occur if struck by flying objects. |
Personal injury or death can result from fumes, gases and ultraviolet rays from the weld arc. Welding can cause fumes, burn skin and produce ultraviolet rays. Keep your head out of the fumes. Use ventilation, exhaust at the arc, or both, to keep fumes and gases from your breathing area. Wear eye, ear and body protection before working. Protect yourself and others; read and understand this warning. Fumes and gases can be dangerous to your health. Ultraviolet rays from the weld arc can injure eyes and burn skin. Electric shock can cause death. Read and understand the manufacturer's instructions and your employer's safety practices. Do not touch live electrical parts. See "American National Standard Z49.1, Safety in Welding and Cutting" published by the American Welding Society. American Welding Society2501 N.W. 7th Street Miami, Florida 33125 See "OSHA Safety and Health Standards, 29 CFR 1910", available from U.S. Department of Labor. U.S. Department of LaborWashington, D.C. 20210 |
Canceled Part Numbers and Replaced Part Numbers
This document does not include all canceled part number and replaced part number information. Use NPR on SIS for information about canceled part numbers and replaced part numbers. NPR will provide the current part numbers for replaced parts.
Roller Oil Volume
TRACTORS, Track-Type | |||||
---|---|---|---|---|---|
Model | Carrier Roller Group | Carrier Roller Assembly | Oil Volume | Oil Weight | CAT Oil Part Number (55 gal)(1) |
D11N, D11T | 1850 ± 50 mL | SAE 15W-40 | |||
1650 ± 50 mL | |||||
D11R | 1850 ± 50 mL | SAE 15W-40 | |||
1300 ± 30 mL | |||||
1650 ± 50 mL | |||||
D10N | 1300 ± 30 mL | SAE 15W-40 | |||
1850 ± 50 mL | |||||
1300 ± 30 mL | |||||
1650 ± 50 mL | |||||
1200 ± 30 mL | |||||
D10R, D10T | 1300 ± 30 mL | SAE 15W-40 | |||
1250 ± 30 mL | |||||
D9 | 750 ± 50 mL | SAE 15W-40 | |||
Refer to Disassembly and Assembly Guideline, REG00684, "General Instructions" for proper filling procedure. | |||||
D9G, D9H | 750 ± 50 mL | SAE 15W-40 | |||
Refer to Disassembly and Assembly Guideline, REG00684, "General Instructions" for proper filling procedure. | |||||
D9N, D9R, D9T | 850 ± 20 mL | SAE 15W-40 | |||
D8H | Refer to Disassembly and Assembly Guideline, REG00684, "General Instructions" for proper filling procedure. | SAE 15W-40 | |||
710 ± 40 mL | |||||
Refer to Disassembly and Assembly Guideline, REG00684, "General Instructions" for proper filling procedure. | |||||
450 ± 40 mL | |||||
D8K | 450 ± 40 mL | SAE 15W-40 | |||
D8N, D8R | 500 ± 15 mL | SAE 15W-40 | |||
450 ± 40 mL | |||||
D8T | 500 ± 15 mL | SAE 15W-40 | |||
D7 | 430 ± 30 mL | SAE 15W-40 | |||
400 ± 30 mL | SAE 15W-40 | ||||
D7E | 430 ± 30 mL | SAE 15W-40 | |||
400 ± 30 mL | |||||
D7F, D7G | 430 ± 30 mL | SAE 15W-40 | |||
400 ± 30 mL | SAE 15W-40 | ||||
D7H, D7R, D7X | 430 ± 30 mL | SAE 15W-40 | |||
400 ± 30 mL | SAE 15W-40 | ||||
D6 | 265 ± 25 mL | SAE 15W-40 | |||
D6C | 265 ± 25 mL | SAE 15W-40 | |||
265 ± 25 mL | |||||
240 ± 20 mL | |||||
D6D | 265 ± 25 mL | SAE 15W-40 | |||
D6E, D6G | 265 ± 25 mL | SAE 15W-40 | |||
D6H, D6R | 430 ± 30 mL | SAE 15W-40 | |||
265 ± 25 mL | |||||
D6K | 230 ± 15 mL | SAE 15W-40 | |||
D6K2 | 230 ± 15 mL | SAE 15W-40 | |||
D6T, D6R2 | 430 ± 30 mL | SAE 15W-40 | |||
D6M, D6N, D5R2, D5R, D5H | 430 ± 30 mL | SAE 15W-40 | |||
265 ± 25 mL | |||||
D5, D5B, D5E | 265 ± 25 mL | SAE 15W-40 | |||
D5C, D5G, D5K, D5M, D5N | 230 ± 15 mL | SAE 15W-40 | |||
240 ± 20 mL | |||||
D5H | 430 ± 30 mL | SAE 15W-40 | |||
265 ± 25 mL | |||||
D5M, D5N | 230 ± 15 mL | SAE 15W-40 | |||
D4, D4D,
D4E |
240 ± 20 mL | SAE 15W-40 | |||
D5K2, D4B, D4K2, D3K2 | 240 ± 20 mL | SAE 15W-40 | |||
250 ± 50 mL | |||||
D5K2
D4C D4K2 D3K2 |
220 ± 30 mL | SAE 15W-40 | |||
230 ± 15 mL | |||||
240 ± 20 mL | |||||
250 ± 50 mL | |||||
D5K2, D4G, D4K, D4K2, D3C, D3G, D3K, D3K2 | 220 ± 30 mL | SAE 15W-40 | |||
250 ± 50 mL | |||||
D4H | 230 ± 15 mL | SAE 15W-40 | |||
240 ± 20 mL | |||||
230 ± 15 mL | |||||
D5K2, D4K2, D3, D3K2 | 240 ± 20 mL | SAE 15W-40 | |||
250 ± 50 mL | |||||
D5K2, D4K2, D3B, D3K2 | 250 ± 50 mL | SAE 15W-40 |
(1) | Refer to 2011 Filter and Fluid Application Guide PEWJ0074 for other available volumes of oil. |
PIPELAYERS, Asphalt Pavers | |||||
---|---|---|---|---|---|
Model | Carrier Roller Group | Carrier Roller Assembly | Oil Volume | Oil Weight | CAT Oil Part Number (55 gal)(1) |
PL61 | 230 ± 15 mL | SAE 15W-40 | |||
594, 594H, 571G | 750 ± 50 mL | SAE 15W-40 | |||
589 | 650 ± 30 mL | SAE 15W-40 | |||
587R, 587T, 583R, 583T, 578 | 650 ± 30 mL | SAE 15W-40 | |||
583, 583H, 583K | 450 ± 40 mL | SAE 15W-40 | |||
PL72 | 430 ± 30 mL | SAE 15W-40 | |||
583R, 583T, PL87, PL83 | 500 ± 15 mL | SAE 15W-40 | |||
572, 572G, 572R, 571, 571A | 400 ± 30 mL | SAE 15W-40 | |||
561 | 265 ± 25 mL | SAE 15W-40 | |||
561C, 561D | 400 ± 30 mL | SAE 15W-40 | |||
265 ± 25 mL | |||||
561H | 400 ± 30 mL | SAE 15W-40 | |||
265 ± 25 mL | |||||
240 ± 20 mL | |||||
561M | 400 ± 30 mL | SAE 15W-40 | |||
240 ± 20 mL | |||||
561N | 240 ± 20 mL | SAE 15W-40 | |||
AP655F | 250 ± 50 mL | SAE 15W-40 |
(1) | Refer to 2011 Filter and Fluid Application Guide PEWJ0074 for other available volumes of oil. |
LOADERS, Track-Type | |||||
---|---|---|---|---|---|
Model | Carrier Roller Group | Carrier Roller Assembly | Oil Volume | Oil Weight | CAT Oil Part Number (55 gal)(1) |
983, 983B | 450 ± 40 mL | SAE 15W-40 | |||
983C | 430 ± 30 mL | SAE 15W-40 | |||
265 ± 25 mL | |||||
977 | 400 ± 30 mL | SAE 15W-40 | |||
265 ± 25 mL | |||||
977L,977K | 400 ± 30 mL | SAE 15W-40 | |||
973, 973C | 400 ± 30 mL | SAE 15W-40 | |||
973 Series Steel Mill | 400 ± 30 mL | SAE 15W-40 | |||
973D | 400 ± 30 mL | SAE 15W-40 | |||
430 ± 30 mL | |||||
963K | 430 ± 30 mL | SAE 15W-40 | |||
963,963B | 430 ± 30 mL | SAE 15W-40 | |||
265 ± 25 mL | |||||
963C | 430 ± 30 mL | SAE 15W-40 | |||
265 ± 25 mL | |||||
963D | 430 ± 30 mL | SAE 15W-40 | |||
955, 955K | 265 ± 25 mL | SAE 15W-40 | |||
955L | 265 ± 25 mL | SAE 15W-40 | |||
953, 953B | 430 ± 30 mL | SAE 15W-40 | |||
265 ± 25 mL | SAE 15W-40 | ||||
953C | 430 ± 30 mL | SAE 15W-40 | |||
265 ± 25 mL | |||||
953D | 230 ± 15 mL | SAE 15W-40 | |||
430 ± 30 mL | |||||
951 | 265 ± 25 mL | SAE 15W-40 | |||
951B, 951C, 939, 939C | 230 ± 15 mL | SAE 15W-40 | |||
265 ± 25 mL | |||||
943, 941, 941B | 240 ± 20 mL | SAE 15W-40 | |||
935, 935B, 935C, 933, 933C, 931B, 931C | 250 ± 50 mL | SAE 15W-40 | |||
931 | 240 ± 20 mL | SAE 15W-40 | |||
250 ± 50 mL |
(1) | Refer to 2011 Filter and Fluid Application Guide PEWJ0074 for other available volumes of oil. |
FRONT SHOVELS, HYDRAULIC EXCAVATORS AND ROTARY DRILLS, Forrestry | |||||
---|---|---|---|---|---|
Model | Carrier Roller Group | Carrier Roller Assembly | Oil Volume | Oil Weight | CAT Oil Part Number (55 gal)(1) |
6015B | 900 ± 30 mL | SAE 15W-40 | |||
5230, 5230B, 5130, 5130B | 700 ± 30 mL | SAE 15W-40 | |||
5130, 5130B | 1500 ± 30 mL | SAE 15W-40 | |||
5110, 5110B | 900 ± 30 mL | SAE 15W-40 | |||
5090B, 390F, 385B, 385C, 385CFS, 385BL, 385CL | 555 ± 30 mL | SAE 15W-40 | |||
5080 | 555 ± 30 mL | SAE 15W-40 | |||
552, 551, 541, 532, 522 | 437 ± 25 mL | SAE 15W-40 | |||
521, 511 | 400 ± 15 mL | SAE 15W-40 | |||
375 | 555 ± 30 mL | SAE 15W-40 | |||
25 ± 5 mL | |||||
555 ± 30 mL | |||||
390F
374D MD6540 MD6540C MD6640 |
555 ± 30 mL | SAE 15W-40 | |||
365, 365B | 555 ± 30 mL | SAE 15W-40 | |||
365BL, 365CL | 555 ± 30 mL | SAE 15W-40 | |||
320 ± 25 mL | |||||
352F | 320 ± 25 mL | SAE 15W-40 | |||
350 | 320 ± 25 mL | SAE 15W-40 | |||
490 ± 25 mL | |||||
349F, 349D, 345B
345BL, 345C, 345D |
320 ± 25 mL | SAE 15W-40 | |||
568B | 170± 10 mL
Akashi 200 ± 10 mL Mec-Track |
SAE 15W-40 | |||
170± 10 mL
Akashi 225 ± 10 mL Mec-Track |
SAE 15W-40 | ||||
568 | 437 ± 25 mL | SAE 15W-40 | |||
558GF | 437 ± 25 mL | SAE 15W-40 | |||
521B
522B 349F |
437 ± 25 mL | SAE 15W-40 | |||
340F, 340D, 340D2, 336D, 336D2, 336E, 336F 330, 330B, 330C, 330D, 329D 328D, 325, 325B, 325C, 325D, 325F | 437 ± 25 mL | SAE 15W-40 | |||
180 mL | |||||
180 ± 10 mL | SAE 15W-40 | ||||
330, 330B | 180 ± 10 mL | SAE 15W-40 | |||
85 ± 5 mL
Akashi 120 ± 5 mL Mec-Track |
|||||
330D, 329D, 325D | 180 ± 10 mL | SAE 15W-40 | |||
329D | 180 ± 10 mL | SAE 15W-40 | |||
316F
318F 318E 318D 318D2 320F 323D2 323F 324D 326D MD5150C |
85 ± 5 mL
Akashi 120 ± 5 mL Mec-Track |
SAE 15W-40 | |||
325D, 324D | 400 ± 15 mL | SAE 15W-40 | |||
285 ± 15 mL
Akashi 350 ± 15 mL Mec-Track |
|||||
323D, 323D2, 322, 322B, 321BSR, 321C, 321D, 320C, 320D, 320D2, 320E, 319C, 319D, 318E, 318D, 318D2, 318C, 318B, 318BL, 318BN, 317, 317BL, 317BLN, 317N, 315, 315B, 315C, 315D, 313D2 MD5150 | 85 ± 5 mL
Akashi 120 ± 5 mL Mec-Track |
SAE 15W-40 | |||
323DS | 118 mL | SAE 15W-40 | |||
180 ± 10 mL | |||||
322C | 285 ± 15 mL
Akashi 350 ± 15 mL Mec-Track |
SAE 15W-40 | |||
85 ± 5 mL
Akashi 120 ± 5 mL Mec-Track |
|||||
320 | 85 ± 8 mL | SAE 15W-40 | |||
320B | 180 ± 10 mL | SAE 15W-40 | |||
320, 320B, 320BL, 320C, 320D, 320D2, 320L | 118 mL | SAE 15W-40 | |||
85 ± 5 mL
Akashi 120 ± 5 mL Mec-Track |
|||||
170± 10 mL
Akashi 200 ± 10 mL Mec-Track |
SAE 15W-40 | ||||
320BS, 320CS, 320S | 118 mL | SAE 15W-40 | |||
180 ± 10 mL | SAE 15W-40 | ||||
314C, 314D, 314E, 313B, 313C, 313D, 312C, 312E, 312D, 312D2, 311, 311B, 311C, 311D, 311F | 85 ± 8 mL | SAE 15W-40 | |||
311F, 312, 312B, 312C, 312D, 312D2, 312F, 313D2, 313F, 314F, 315F | 85 ± 5 mL
Akashi 120 ± 5 mL Mec-Track |
SAE 15W-40 | |||
308B, 308C, 308D, 307, 307B | 25 ± 5 mL | SAE 15W-40 | |||
308E2, 308BSR, 308CCR, 308CSR, 308DCR, 308DSR, 307E2, 307C, 307D, 306, 305.5 | 25 ± 5 mL | SAE 15W-40 | |||
25 ± 5 mL | SAE 15W-40 | ||||
TK752, TK751, TK732 | 437 ± 25 mL | SAE 15W-40 | |||
TK741, TK722, TK721, TK711 | 400 ± 15 mL | SAE 15W-40 | |||
TK711 | 375 ± 15 mL | SAE 15W-40 | |||
E70B | 25 ± 5 mL | SAE 15W-40 | |||
245D
245B 245 |
450 ± 20 mL | SAE 15W-40 | |||
235D
235B |
400 ± 30 mL | SAE 15W-40 | |||
235C, 235, 231D | 400 ± 30 mL | SAE 15W-40 | |||
265 ± 25 mL | |||||
229,229D,227 | 265 ± 25 mL | SAE 15W-40 | |||
225D | 265 ± 25 mL | SAE 15W-40 | |||
225 | 400 ± 30 mL | SAE 15W-40 | |||
240 ± 20 mL | |||||
265 ± 25 mL | |||||
215C, 215D, 213B, 211B, 205B | 240 ± 20 mL | SAE 15W-40 | |||
215B
215 |
240 ± 20 mL | SAE 15W-40 | |||
265 ± 25 mL | |||||
250 ± 25 mL |
(1) | Refer to 2011 Filter and Fluid Application Guide PEWJ0074 for other available volumes of oil. |