C27 and C32 Engines for Caterpillar Built Machines Caterpillar


Turbocharger

Usage:

D11T AMA



Ilustrasi 1g03145719

Tampak belakang engine

Tabel 1
Spesifikasi untuk Grup Turbocharger 347-4294    
Item     Jml     Suku Cadang     Deskripsi Spesifikasi    
1     8     Mur Pengunci Flensa 391-2167     Sebelum perakitan, berikan senyawa Anti-Macet Tembaga Loctite C5A ke ulir.
Kencangkan dengan torsi
70 ± 5 N·m (52 ± 4 lb ft).    



Ilustrasi 2g03145720

Tabel 2
Item     Jml     Suku Cadang     Deskripsi Spesifikasi    
2     -     -     Kencangkan susunan klem kompresor ke
13,6 ± 1,2 N·m (120,4 ± 10,6 lb in).    
3     -     -     Gunakan prosedur berikut untuk mengencangkan susunan klem turbin:

1. Kencangkan susunan klem ke
18,0 ± 1,6 N·m (159,3 ± 14,2 lb in).
2. Kendurkan susunan klem sebesar satu hingga dua putaran.
3. Kencangkan kembali susunan klem ke
13,6 ± 1,2 N·m (120,4 ± 10,6 lb in).    

Caterpillar Information System:

D6T Track-Type Tractor Machine Systems including Specifications Lift Cylinder (Bulldozer) - VPAT
D6T Track-Type Tractor Machine Systems including Specifications Angle Cylinder (Bulldozer)
D6T Track-Type Tractor Machine Systems including Specifications Lift Cylinder (Bulldozer)
D6T Track-Type Tractor Machine Systems including Specifications Piston Motor (Fan Drive)
D6T Track-Type Tractor Machine Systems including Specifications System Pressure
D6T Track-Type Tractor Machine Systems including Specifications Control Manifold - Pilot
D6T Track-Type Tractor Engine including Specifications Flywheel Housing
D6T Track-Type Tractor Machine Systems including Specifications Control Manifold
D6T Track-Type Tractor Machine Systems including Specifications Fan Reversing Valve
D6T Track-Type Tractor Engine including Specifications Speed/Timing Sensor
D6T Track-Type Tractor Engine including Specifications Engine Oil Pressure Sensor
D6T Track-Type Tractor Machine Systems including Specifications Cylinder Mounting
D6T Track-Type Tractor Machine Systems including Specifications Tilt Cylinder (Bulldozer)
D8T Track-Type Tractor Machine Systems Refrigerant Condenser
C3.4B Engines Diesel Particulate Filter Active Regeneration Occurrence Is Excessive
Procedure to Restore Sprocket Shaft Bores in Oval Track-Type Machines{4058, 4164, 4184} Procedure to Restore Sprocket Shaft Bores in Oval Track-Type Machines{4058, 4164, 4184}
D8T Track-Type Tractor Machine Systems Engine Enclosure
2011/01/06 The Oscillation Angle for the Equalizer Bar Is Now Controlled on D6G Track Type Tractors {7206}
Carrier Roller Oil Fill Volume {4154} Carrier Roller Oil Fill Volume {4154}
Welding Wire and Flux {0679, 4150, 7950} Welding Wire and Flux {0679, 4150, 7950}
D8T Track-Type Tractor Charge Pump
992K Wheel Loader Machine Systems Brake Control Valve (Parking) - Remove and Install
D8T Track-Type Tractor Hydraulic System Bulldozer Tilt Control Valve
D8T Track-Type Tractor Hydraulic System Ripper Tilt Control Valve
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.