2013/09/16 Caterpillar


An Improved Turbocharger and Software are Available {1052, 7620}

Usage:

3196 2XR
Marine Engine:
3196 MARINE (S/N: 2XR1-UP)
Engine News SEBD9403, 19 June 2006, "An Improved Turbocharger and Software are Available {1052, 7620}". Disregard the previous article. The following article has been updated with new part numbers.

The improved turbocharger and the improved software are now available for the above 3196 Marine Engine that develops 660 hp at 2300 rpm. The turbocharger and the software will help to reduce smoke during acceleration.

The turbocharger will require new air lines and new oil lines for the proper fit. The new parts are listed in Table 1.

The new software will require a factory password. Submit a "Factory Password Request Form". The "Factory Password Request Form" must identify the new parts that have changed and the new labels that are ordered for the emissions. The labels for emissions can be ordered at the following web site:

https://truck.cat.com/cda/layout?m=37062&x=125

Table 1
Part Number     Quantity     Part Name    
061-9455     1     O-Ring Seal    
0S-1591     2     Bolt    
3B-1915     2     Bolt    
244-3399     1     Tube As    
8H-9788     1     Gasket    
5M-2894     2     Hard Washer    
1S-4810     1     Oil Drain Gasket    
114-2687     1     O-Ring Seal    
144-2933     1     Tube As    
3K-0360     1     O-Ring Seal    
138-2547 (1)     1     Tube As    
126-0123 (2)     1     Tube As    
6V-3917     2     O-Ring Seal    
126-0124     1     Gasket    
243-2561     1     Turbocharger Gp    
283-8742     1     Engine Rating Electronic Software    
( 1 ) This tube assembly is for use with low profile air lines as shown in Illustration 1.
( 2 ) This tube assembly is for use with standard profile air lines as shown in Illustration 2.



Illustration 1g03438298

(1) 138-2547 Tube As




Illustration 2g03438556

(2) 126-0123 Tube As

Caterpillar Information System:

C4.4 Industrial Engine Water Temperature Regulator - Remove and Install
C4.4 Industrial Engine Water Pump - Remove
C4.4 Industrial Engine Water Pump - Install
C4.4 Industrial Engine Wastegate Solenoid - Remove and Install
C4.4 Industrial Engine Valve Mechanism Cover Base - Remove and Install
C4.4 Industrial Engine Valve Mechanism Cover - Remove and Install
C4.4 Industrial Engine Vacuum Pump - Remove and Install
C4.4 Industrial Engine V-Belts - Remove and Install - Engines Without an Automatic Belt Tensioner
C4.4 Engines for Caterpillar Built Machines Turbocharger - Install
C4.4 Industrial Engine Rocker Shaft and Pushrod - Remove
C4.4 Industrial Engine Rocker Shaft and Pushrod - Install
C4.4 Industrial Engine Rocker Shaft - Disassemble
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys High Voltage Interface PWA
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Current Transformer (Controls Cabinet)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys APC2 Control Interface PWA
Communications on the J1939 Data Link{1901} Communications on the J1939 Data Link{1901}
3044C Industrial Engine Maintenance Interval Schedule
C280 Marine Auxiliary Engines Event Code List
C280 Marine Auxiliary Engines Engine Overspeed
C4.4 Industrial Engine Turbocharger - Inspect
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Vacuum Pump Startup - Required Procedures After Extended Storage
3044C Industrial Engine Alternator and Fan Belts - Inspect/Adjust/Replace
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Starting Motor - Inspect
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Modem and Power Supply
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.