Water Pump - Assemble
装配步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| C | 1P-0510 | 冲头总成 | 1 |
| D | FT-3171 | 密封件冲头 | 1 |
- 将滤清器 (11) 和塞 (10) 安装到泵壳体 (2) 中。
Show/hide table
 | |
| 图 1 | g02209277 |
- 使用工具 (C) 和适当的压力机将密封件 (7) 安装到泵壳体 (2) 中，如图所示。
Show/hide table
 | |
| 图 2 | g02208893 |
Show/hide table
 | |
| 图 3 | g02208953 |
- 使用适当的压力机将轴 (6) 安装到轴承组件 (8) 中。
Show/hide table
 | |
| 图 4 | g02209237 |
- 将轴组件 (6) 安装到泵壳体 (2) 中。
Show/hide table
 | |
| 图 5 | g02209774 |
- 安装护圈 (5) 和螺栓 (4) 。
Show/hide table
 | |
| 图 6 | g02209894 |
- 加热齿轮 (3) 。 使用适当的压力机将轴组件 (6) 压入齿轮 (3) 中，直至齿轮 (3) 与轴承 (8) 平齐。
Show/hide table
 | |
| 图 7 | g02210093 |
- 使用工具 (D) 和适当的压力机将密封件组件 (9) 安装到泵壳体中。
注: 必须使用工具 (D) 以确保密封件组件 (9) 的正确安装。
Show/hide table
 | |
| 图 8 | g02210320 |
- 加热叶轮 (1) 。 使用适当的压力机安装叶轮 (1) ，直至叶轮 (1) 与轴 (6) 平齐。
Show/hide table
 | |
| 图 9 | g02210293 |
End By: 安装水泵。
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Water Pump - Disassemble
2010/08/11 The Cab Mounts Have Changed for Certain 980H Wheel Loaders {7301, 7301}
2010/08/06 Improved Fade Resistant Red Power Edge Decal Now Being Used on Certain Wheel Loader Machines {7405, 7557}
980K Wheel Loader Machine Systems Fuel Level Sender
D7E Track-Type Tractor Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
D11T Track-Type Tractor MID 082 - CID 2357 - FMI 04
980K Wheel Loader Steering System Steering Cylinder
980K Wheel Loader Steering System Pressure Sensor (Steering) - Secondary Steering
994H Wheel Loader Machine Systems Expansion Tank - Remove and Install
D7E Track-Type Tractor Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
C6.6 Engines For Caterpillar Built Machines E265 User Defined Shutdown
623H Wheel Tractor-Scraper Elevator Chain - Inspect/Adjust
2010/08/10 New Heater Coil Assemblies are Now Available for Certain D6K Track Type Tractors and D-Series Track Type Loaders {7304}
Repair Procedure for Cracks on the Paddle Plate of the Rock Bucket on 988G and 988H Wheel Loaders{6102} Repair Procedure for Cracks on the Paddle Plate of the Rock Bucket on 988G and 988H Wheel Loaders{6102}
966K Wheel Loader and 972K Wheel Loader Power Train Transmission Hydraulic Control
966K and 972K Wheel Loaders Power Train Torque Converter, Transmission and Output Transfer Gears - Remove and Install
584 and 584HD Forwarders Fire Safety
2010/08/19 Correction to Disassembly and Assembly , "Engine and Torque Converter Updrive Gears - Remove" {1000, 3101, 3105, 3159}
2010/08/19 Correction to Disassembly and Assembly , "Engine and Torque Converter Updrive Gears - Install" {1000, 3101, 3105, 3159}
2010/08/19 Correction to Disassembly and Assembly , "Engine and Torque Converter Updrive Gears - Install" {1000, 3101, 3105, 3159}
C7.1 Industrial Engine Flow Control Valve - Remove and Install
C7.1 Industrial Engine Fuel Temperature Sensor - Remove and Install
C6.6 Engines For Caterpillar Built Machines CID 0168 FMI 03
C6.6 Engines For Caterpillar Built Machines CID 0168 FMI 04