The Cab Mounts Have Changed for Certain 980H Wheel Loaders {7301, 7301}
- Wheel Loader:
- 980H (S/N: JMS1-UP)
Description of Change:
The cab mounts have been changed back to the original production cab mounts on 980H Wheel Loaders. This mount is more rigid and will reduce cab motion.
Adaptable To: The 117-8131 Mount As will replace the 311-2178 Mount. The 117-8131 Mount As is in the 191-8567 Cab Mounting Gp and the 311-2178 Mount is in the 329-4998 Cab Mounting Gp. Therefore, the 191-8567 Cab Mounting Gp will replace the 329-4998 Cab Mounting Gp. The effectivity for this change is shown in table 1.
Show/hide table
Effectivity     | ||
Model     | Adaptable To Machines     | Effective With Machines     |
980H     | S/N:JMS5298-5460,5470-5472,5474-5476,5478-5517,5519-5542,5544-5545     | S/N:JMS1-5297,5461-5469,5473-5473,5477-5477,5518-5518,5543-5543,5546-UP     |
Show/hide table
Illustration 1 | g02209286 |
Illustration for the 191-8567 Cab Mounting Gp (1) 117-8131 Mount As (2) 9U-0512 Washer (3) 242-6098 Sleeve (4) 7X-0593 Hard Washer (5) 8T-6624 Bolt |
Caterpillar Information System:
2010/08/06 Improved Fade Resistant Red Power Edge Decal Now Being Used on Certain Wheel Loader Machines {7405, 7557}
980K Wheel Loader Machine Systems Fuel Level Sender
D7E Track-Type Tractor Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
D11T Track-Type Tractor MID 082 - CID 2357 - FMI 04
980K Wheel Loader Steering System Steering Cylinder
980K Wheel Loader Steering System Pressure Sensor (Steering) - Secondary Steering
994H Wheel Loader Machine Systems Expansion Tank - Remove and Install
D7E Track-Type Tractor Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
C6.6 Engines For Caterpillar Built Machines E265 User Defined Shutdown
623H Wheel Tractor-Scraper Elevator Chain - Inspect/Adjust
D11T Track-Type Tractor MID 082 - CID 2357 - FMI 03
623G Wheel Tractor-Scraper Maintenance Interval Schedule
C27 and C32 Engines for Caterpillar Built Machines Water Pump - Disassemble
C27 and C32 Engines for Caterpillar Built Machines Water Pump - Assemble
2010/08/10 New Heater Coil Assemblies are Now Available for Certain D6K Track Type Tractors and D-Series Track Type Loaders {7304}
Repair Procedure for Cracks on the Paddle Plate of the Rock Bucket on 988G and 988H Wheel Loaders{6102} Repair Procedure for Cracks on the Paddle Plate of the Rock Bucket on 988G and 988H Wheel Loaders{6102}
966K Wheel Loader and 972K Wheel Loader Power Train Transmission Hydraulic Control
966K and 972K Wheel Loaders Power Train Torque Converter, Transmission and Output Transfer Gears - Remove and Install
584 and 584HD Forwarders Fire Safety
2010/08/19 Correction to Disassembly and Assembly , "Engine and Torque Converter Updrive Gears - Remove" {1000, 3101, 3105, 3159}
2010/08/19 Correction to Disassembly and Assembly , "Engine and Torque Converter Updrive Gears - Install" {1000, 3101, 3105, 3159}
2010/08/19 Correction to Disassembly and Assembly , "Engine and Torque Converter Updrive Gears - Install" {1000, 3101, 3105, 3159}
C7.1 Industrial Engine Flow Control Valve - Remove and Install
C7.1 Industrial Engine Fuel Temperature Sensor - Remove and Install