Steering Cylinder
Show/hide table
 | |
| Illustration 1 | g03205196 |
Show/hide table
| Specification for 319-5051 Steering Cylinder Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 5J-1446 Bearing | Bore diameter is 57.284 ± 0.008 mm (2.2553 ± 0.0003 inch). |
| Installation depth is 8.6 ± 0.5 mm (0.34 ± 0.02 inch). |
|||
| 2 | 1 | 6V-8223 Socket Setscrew | Torque to 25 ± 6 N·m (221 ± 53 lb in). |
| 3 | 3 | 148-8408 Plug As | Torque to 140 ± 14 N·m (103 ± 10 lb ft). |
| 4 | 1 | 242-9515 Retaining Ring | Before assembly, apply blue Loctite 242 to the threads. Torque to 35 ± 5 N·m (26 ± 4 lb ft). |
| 5 | 1 | 242-9514 Carrier | Before assembly, apply blue Loctite 242 to the threads. Torque to 35 ± 5 N·m (26 ± 4 lb ft). |
| 6 | 1 | 329-5789 Buffer Seal As | Before assembly, lubricate the sealing lip lightly with lubricant that is being sealed. |
| 7 | 1 | 329-5793 U-Cup Seal | Before assembly, lubricate the sealing lip lightly with lubricant that is being sealed. |
| 8 | 1 | 329-5791 Wiper Seal | Before assembly, lubricate the sealing lip lightly with lubricant that is being sealed. |
| 9 | - | - | Before assembly, apply green Loctite 609 to wiper seal groove. |
| 10 | 1 | 9X-6611 Socket Setscrew | Before assembly, apply blue Loctite 242 to the threads. Torque to 35 ± 5 N·m (26 ± 4 lb ft). |
| 11 | 1 | 350-0013 Piston | Before assembly, lubricate the threads with clean grease. Torque to 1375 ± 137 N·m (1014 ± 101 lb ft). |
| A | 1 | 328-7126 Steering Cylinder | Bore diameter is 100.00 ± 0.08 mm (3.937 ± 0.003 inch). |
| B | 1 | 365-6165 Rod As | Diameter is 54.950 ± 0.038 mm (2.1634 ± 0.0015 inch). |
| 12 | 1 | 328-7132 Head | Before assembly, lubricate the threads with clean grease. Bore (C) over the four lands is 55.330 ± 0.030 mm (2.1783 ± 0.0012 inch). Torque to 600 ± 60 N·m (443 ± 44 lb ft). |
| 13 | 1 | 212-0907 Connector Plate | Before assembly, apply red Loctite 271 to the threads. |
| 14 | 2 | 8T-8894 Bolt | Torque to 47 ± 9 N·m (35 ± 7 lb ft). |
Caterpillar Information System:
980K Wheel Loader Steering System Pressure Sensor (Steering) - Secondary Steering
994H Wheel Loader Machine Systems Expansion Tank - Remove and Install
D7E Track-Type Tractor Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
C6.6 Engines For Caterpillar Built Machines E265 User Defined Shutdown
623H Wheel Tractor-Scraper Elevator Chain - Inspect/Adjust
D11T Track-Type Tractor MID 082 - CID 2357 - FMI 03
623G Wheel Tractor-Scraper Maintenance Interval Schedule
D11T Track-Type Tractor MID 082 - CID 2114 - FMI 04
994H Wheel Loader Machine Systems Check and Relief Valve (Main Hydraulic) - Remove
994H Wheel Loader Machine Systems Check and Relief Valve (Main Hydraulic) - Install
C15 and C18 Industrial Engines Solenoid Valve (ARD Main Fuel) - Remove and Install
D11T Track-Type Tractor MID 082 - CID 2114 - FMI 03
D11T Track-Type Tractor MID 082 - CID 2357 - FMI 04
D7E Track-Type Tractor Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
980K Wheel Loader Machine Systems Fuel Level Sender
2010/08/06 Improved Fade Resistant Red Power Edge Decal Now Being Used on Certain Wheel Loader Machines {7405, 7557}
2010/08/11 The Cab Mounts Have Changed for Certain 980H Wheel Loaders {7301, 7301}
C27 and C32 Engines for Caterpillar Built Machines Water Pump - Disassemble
C27 and C32 Engines for Caterpillar Built Machines Water Pump - Assemble
2010/08/10 New Heater Coil Assemblies are Now Available for Certain D6K Track Type Tractors and D-Series Track Type Loaders {7304}
Repair Procedure for Cracks on the Paddle Plate of the Rock Bucket on 988G and 988H Wheel Loaders{6102} Repair Procedure for Cracks on the Paddle Plate of the Rock Bucket on 988G and 988H Wheel Loaders{6102}
966K Wheel Loader and 972K Wheel Loader Power Train Transmission Hydraulic Control
966K and 972K Wheel Loaders Power Train Torque Converter, Transmission and Output Transfer Gears - Remove and Install
584 and 584HD Forwarders Fire Safety