Fuel Level Sender
Show/hide table
Illustration 1 | g03211498 |
Show/hide table
Specification for 324-3642 Fuel Level Sender As     | |||
Item     | Qty     | Part     | Specification Description     |
A     | -     | -     | Calibration at full position distance is 38.6 mm (1.52 inch).     |
Resistance at full float position is 0.0 to 3.5 Ohms. | |||
B     | -     | -     | Calibration at empty position is 1147.8 mm (45.19 inch).     |
Resistance at empty float position is 92.3 to 95.0 ohms. | |||
-     | -     | -     | Operating voltage is 12 VDC or 24 VDC.     |
Caterpillar Information System:
D7E Track-Type Tractor Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
D11T Track-Type Tractor MID 082 - CID 2357 - FMI 04
980K Wheel Loader Steering System Steering Cylinder
980K Wheel Loader Steering System Pressure Sensor (Steering) - Secondary Steering
994H Wheel Loader Machine Systems Expansion Tank - Remove and Install
D7E Track-Type Tractor Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
C6.6 Engines For Caterpillar Built Machines E265 User Defined Shutdown
623H Wheel Tractor-Scraper Elevator Chain - Inspect/Adjust
D11T Track-Type Tractor MID 082 - CID 2357 - FMI 03
623G Wheel Tractor-Scraper Maintenance Interval Schedule
D11T Track-Type Tractor MID 082 - CID 2114 - FMI 04
994H Wheel Loader Machine Systems Check and Relief Valve (Main Hydraulic) - Remove
2010/08/06 Improved Fade Resistant Red Power Edge Decal Now Being Used on Certain Wheel Loader Machines {7405, 7557}
2010/08/11 The Cab Mounts Have Changed for Certain 980H Wheel Loaders {7301, 7301}
C27 and C32 Engines for Caterpillar Built Machines Water Pump - Disassemble
C27 and C32 Engines for Caterpillar Built Machines Water Pump - Assemble
2010/08/10 New Heater Coil Assemblies are Now Available for Certain D6K Track Type Tractors and D-Series Track Type Loaders {7304}
Repair Procedure for Cracks on the Paddle Plate of the Rock Bucket on 988G and 988H Wheel Loaders{6102} Repair Procedure for Cracks on the Paddle Plate of the Rock Bucket on 988G and 988H Wheel Loaders{6102}
966K Wheel Loader and 972K Wheel Loader Power Train Transmission Hydraulic Control
966K and 972K Wheel Loaders Power Train Torque Converter, Transmission and Output Transfer Gears - Remove and Install
584 and 584HD Forwarders Fire Safety
2010/08/19 Correction to Disassembly and Assembly , "Engine and Torque Converter Updrive Gears - Remove" {1000, 3101, 3105, 3159}
2010/08/19 Correction to Disassembly and Assembly , "Engine and Torque Converter Updrive Gears - Install" {1000, 3101, 3105, 3159}
2010/08/19 Correction to Disassembly and Assembly , "Engine and Torque Converter Updrive Gears - Install" {1000, 3101, 3105, 3159}