980K Wheel Loader Steering System Caterpillar


Pressure Sensor (Steering) - Secondary Steering

Usage:

980K GTZ



Illustration 1g02109946

Maximum operating pressure ... 34500 kPa (5000 psi)

Operating voltage ... 5 ± 0.25 VDC

Operating Temperature ... −40° to 125°C (−40° to 225°F)

(1) Final installation torque ... 30 ± 3 N·m (265 ± 27 lb in)

Caterpillar Information System:

994H Wheel Loader Machine Systems Expansion Tank - Remove and Install
D7E Track-Type Tractor Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
C6.6 Engines For Caterpillar Built Machines E265 User Defined Shutdown
623H Wheel Tractor-Scraper Elevator Chain - Inspect/Adjust
D11T Track-Type Tractor MID 082 - CID 2357 - FMI 03
623G Wheel Tractor-Scraper Maintenance Interval Schedule
D11T Track-Type Tractor MID 082 - CID 2114 - FMI 04
994H Wheel Loader Machine Systems Check and Relief Valve (Main Hydraulic) - Remove
994H Wheel Loader Machine Systems Check and Relief Valve (Main Hydraulic) - Install
C15 and C18 Industrial Engines Solenoid Valve (ARD Main Fuel) - Remove and Install
D11T Track-Type Tractor MID 082 - CID 2114 - FMI 03
986H Wheel Loader Machine Systems Diverter Valve (Secondary Steering)
980K Wheel Loader Steering System Steering Cylinder
D11T Track-Type Tractor MID 082 - CID 2357 - FMI 04
D7E Track-Type Tractor Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
980K Wheel Loader Machine Systems Fuel Level Sender
2010/08/06 Improved Fade Resistant Red Power Edge Decal Now Being Used on Certain Wheel Loader Machines {7405, 7557}
2010/08/11 The Cab Mounts Have Changed for Certain 980H Wheel Loaders {7301, 7301}
C27 and C32 Engines for Caterpillar Built Machines Water Pump - Disassemble
C27 and C32 Engines for Caterpillar Built Machines Water Pump - Assemble
2010/08/10 New Heater Coil Assemblies are Now Available for Certain D6K Track Type Tractors and D-Series Track Type Loaders {7304}
Repair Procedure for Cracks on the Paddle Plate of the Rock Bucket on 988G and 988H Wheel Loaders{6102} Repair Procedure for Cracks on the Paddle Plate of the Rock Bucket on 988G and 988H Wheel Loaders{6102}
966K Wheel Loader and 972K Wheel Loader Power Train Transmission Hydraulic Control
966K and 972K Wheel Loaders Power Train Torque Converter, Transmission and Output Transfer Gears - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.