Electric Starting Motor - Remove and Install - Engine in Chassis
- Turn battery disconnect switch (1) to the OFF position.
Show/hide table
Illustration 2 g02155593 - Use two people in order to lower guard assembly (2). The weight of guard assembly (2) is approximately
80 kg (175 lb) .Show/hide tableIllustration 3 g02155590 - Disconnect cable assemblies (3) and (4). Disconnect harness assembly (5). Disconnect clip (6) from electric starting motor (7).
- Use two people in order to remove electric starting motor (7). The weight of electric starting motor (7) is approximately
36 kg (80 lb) .
Show/hide table
Illustration 1 | g02154283 |
- Install electric starting motor (7) in the reverse order of the removal procedure.
- Tighten the nuts for cable assembly (3) and cable assembly (4) to a torque of
30.5 ± 3.5 N·m (270.00 ± 31.00 in) .
- Tighten the nuts for cable assembly (3) and cable assembly (4) to a torque of
Caterpillar Information System:
D8T and D9T Track-Type Tractors MID 113 - CID 2596 - FMI 05
2010/06/21 Reworking of the Axle Hub Bolts on Certain Compact Wheel Loaders {3278, 4050, 4084}
980K Wheel Loader Engine Compartment - Clean
D11T Track-Type Tractor Hydraulic System Reversing Hydraulic Fan System (Optional)
D11T Track-Type Tractor Hydraulic System Fan Drive Motor
D11T Track-Type Tractor Hydraulic System Fan Drive Pump - Fan Pump Section and Control Valve
D11T Track-Type Tractor Hydraulic System Fan Drive System
D11T Track-Type Tractor Hydraulic System Pin Puller Hydraulic System
D11T Track-Type Tractor Hydraulic System Dual Tilt Control Valve - Equipped Without the Quick Dump Valve
980K Wheel Loader Windows - Clean
D11T Track-Type Tractor Hydraulic System Quick-Drop Valve
D11T Track-Type Tractor Hydraulic System Electrohydraulic Pilot Manifold
C9.3 Tier 4 Final Engines Exhaust Manifold
2010/06/17 New VIMS Software Is Now Available For Certain CAT Product {7601, 7620}
D8T and D9T Track-Type Tractors MID 113 - CID 2596 - FMI 06
980K Wheel Loader Electrohydraulic System Ride Control Valve
D11T Track-Type Tractor Hydraulic System Operational Tests
D11T Track-Type Tractor Hydraulic System Relief Valve - Test and Adjust
D11T Track-Type Tractor Hydraulic System Pilot System Pressure - Test and Adjust
D8T and D9T Track-Type Tractors MID 113 - CID 2596 - FMI 13
D11T Track-Type Tractor Hydraulic System Accumulator - Test and Charge
D11T Track-Type Tractor Hydraulic System Hydraulic Fan Drive System - Test and Adjust
D8T and D9T Track-Type Tractors MID 113 - CID 3642 - FMI 02
854K Wheel Dozer and 992K Wheel Loader Fuel Cooler - Remove and Install