Electronic Control Module - Remove and Install
- Disconnect the battery. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Disconnect".
Show/hide table
Illustration 1 g01264962 - Loosen allen head bolt (1). Disconnect harness assembly (2).
- Remove nuts (3). Remove electronic control module (4).
- Install electronic control module (4). Install nuts (3).
- Connect harness assembly (2). Tighten allen head bolt (1) to a torque of
6 ± 1 N·m (53 ± 9 lb in) . - Connect the battery. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Connect".
Show/hide table
Illustration 2 | g01264962 |
Caterpillar Information System:
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys System Operational Modes
C7 On-Highway Engine Engine Oil Pressure Sensor - Remove and Install
TA19-M2WD and TA19-M4WD Agricultural Transmissions Temperature Sensor (Transmission Oil) - Remove and Install
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Component Overview and Operation Overview
C9.3 Engines for Caterpillar Built Machines Speed/Timing Sensor - Remove and Install
C13 and C15 On-Highway Engines Walk-Around Inspection
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Abbreviations and Acronyms
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 0967 - FMI 09
3500B Industrial Engines with the ADEM 3 Electronic Control Module Analog Sensor (Active)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys System Overview
C7 On-Highway Engine Fuel Pressure Regulator - Remove and Install
C4.4 Industrial Engine Lubrication System
Marine Multi-Station Control System Throttle Response Is Erratic
TA19-M2WD and TA19-M4WD Agricultural Transmissions Speed Sensor (Transmission) - Remove
TA19-M2WD and TA19-M4WD Agricultural Transmissions Speed Sensor (Transmission) - Install
2006/06/05 Improved Balance Disc is Now Available {4457}
2006/04/24 A New Tube Assembly is Released {1380}
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Discharge Modes
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Service Connections
C13 and C15 On-Highway Engines Customer Assistance
C4.4 Industrial Engine Fuel Injection
C13 Engine Water Temperature Regulator - Remove and Install
C7 Urban Transit Bus Engines Cooling System Coolant Sample (Level 2) - Obtain
2006/05/15 New ECM Software is Available {7620}