Temperature Sensor (Transmission Oil) - Remove and Install
Removal Procedure
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect harness assembly (1) .
Show/hide table
 | |
| Illustration 1 | g01264924 |
- Remove temperature sensor (2). Remove O-ring seal (3) .
Show/hide table
 | |
| Illustration 2 | g01264940 |
Installation Procedure
- Install O-ring seal (3). Install temperature sensor (2). Tighten temperature sensor (2) to a torque of 15 ± 3 N·m (11 ± 2 lb ft).
Show/hide table
| | |
| Illustration 3 | g01264940 |
- Connect harness assembly (1) .
Show/hide table
| | |
| Illustration 4 | g01264924 |
Caterpillar Information System:
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Component Overview and Operation Overview
C9.3 Engines for Caterpillar Built Machines Speed/Timing Sensor - Remove and Install
C13 and C15 On-Highway Engines Walk-Around Inspection
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Abbreviations and Acronyms
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 0967 - FMI 09
3500B Industrial Engines with the ADEM 3 Electronic Control Module Analog Sensor (Active)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys System Overview
C7 On-Highway Engine Fuel Pressure Regulator - Remove and Install
C4.4 Industrial Engine Lubrication System
Application and Installation Guide (Mechanical) for the CX28 On-Highway Transmission{3030, 3101} Application and Installation Guide (Mechanical) for the CX28 On-Highway Transmission{3030, 3101}
C4.4 Industrial Engine Cooling System
C7 On-Highway Engine Unit Injector - Install
C7 On-Highway Engine Engine Oil Pressure Sensor - Remove and Install
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys System Operational Modes
C11 and C13 Petroleum Engines Electronic Control Module - Remove and Install
Marine Multi-Station Control System Throttle Response Is Erratic
TA19-M2WD and TA19-M4WD Agricultural Transmissions Speed Sensor (Transmission) - Remove
TA19-M2WD and TA19-M4WD Agricultural Transmissions Speed Sensor (Transmission) - Install
2006/06/05 Improved Balance Disc is Now Available {4457}
2006/04/24 A New Tube Assembly is Released {1380}
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Discharge Modes
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Service Connections
C13 and C15 On-Highway Engines Customer Assistance
C4.4 Industrial Engine Fuel Injection