Tape Tool Marker Is Available{0600}
Usage:
All Caterpillar Products
A new 6V7939 Tape Tool Marker, filled with ten rolls of marker tape, is available. The tape tool marker has ten refillable compartments that hold individual rolls of numbered tape. The individual rolls, numbered zero through nine, can be ordered from the Parts Department.
NOTE: The 6V7939 Tape Tool Markers are packaged 25 in a box. The refill rolls, shown in the chart, are packaged ten in a box.
The tape is an epoxy film with an acrylic adhesive backing and is resistant to oils and solvents. The tape is useful for marking hydraulic lines, wiring harnesses and many other applications where other types of tape are not appropriate.
Use the following chart to order replacement rolls of individually numbered tape.
Caterpillar Information System:
1985/11/11 Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11 Effects Of Liner Wear In Engines Using Plasma Coated Top Rings{1215,1216,7770}
1985/11/11 Exhaust Manifold Gasket Leaks May Be Prevented By Correct Installation{1059,1050,1061}
1985/11/04 New Instruction Films (Decals) Available {7405,7451}
1985/11/04 Meter Panel Cover Folds Down Completely {7451}
1985/11/04 Reusability And Assembly Recommendations For Conventional And Inverted Duo-Cone Seals {7561}
1985/10/28 Air Regulated Torque Wrench Group Available{0614}
1985/10/28 New Marine Transmission Oil Cooler Group Available{3320}
1985/10/28 Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28 Higher Temperature Material Used In Camshaft Base Gasket{1113,1120}
1985/10/28 Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28 Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/11/11 New Retaining Rings Used In BrakeSaver Groups{1155}
1985/11/11 Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11 Caterpillar Offers Remanufactured Turbocharged 3208 Engines At Significant Savings{1000,7754}
1985/11/11 Two Different Piston Oil Ring Designs Used{1215}
1985/11/18 Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18 Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18 Filter Added To Drain Hole In Water Pumps{1361}
1985/11/25 Faster Response Water Temperature Regulators; Service Simplified{1350,1355}
1985/11/25 New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25 Output Shaft Group Improved{3305}
1985/11/25 Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25 Oil Pressure Shutdown Specifications Change For Hydramechanical Shutoff System{1085}