1985/11/04 Caterpillar


New Instruction Films (Decals) Available {7405,7451}

Usage:


All Generator Set Packages

Two new instruction films (decals) are available to attach to the control panels of generator set packages. The new films are designed to fit on the inside of the anti-vandalism door or the dustproof door of the generator set package.

The various functions of the generator set control panels are shown as illustrations, using symbols. In order to avoid confusion, the 7W3063 Control Panel Film can be used to provide a quick reference for the definitions of the symbols used. The film shows both the symbol and the English definition.

The 7W3057 Starting Instruction Film can be used to provide a readily available list of starting instructions and procedures.

Caterpillar Information System:

1985/11/04 Meter Panel Cover Folds Down Completely {7451}
1985/11/04 Reusability And Assembly Recommendations For Conventional And Inverted Duo-Cone Seals {7561}
1985/10/28 Air Regulated Torque Wrench Group Available{0614}
1985/10/28 New Marine Transmission Oil Cooler Group Available{3320}
1985/10/28 Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28 Higher Temperature Material Used In Camshaft Base Gasket{1113,1120}
1985/10/28 Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28 Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28 What ROPS/FOPS Certification Means{7323,7325,7264,7266}
1985/10/21 Engine Shuts Down Immediately After Start-Up {7400}
1985/10/21 Cylinder Head And Valve Rocker Arm Brackets Have Oil Supply Passages In A Different Location To Prevent Possible Oil Leakage Into Cooling System {1100,1102,1350}
1985/10/21 Use Glycerine On Most O-Ring Seals {7555,1216,1050}
1985/11/11 Exhaust Manifold Gasket Leaks May Be Prevented By Correct Installation{1059,1050,1061}
1985/11/11 Effects Of Liner Wear In Engines Using Plasma Coated Top Rings{1215,1216,7770}
1985/11/11 Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11 Tape Tool Marker Is Available{0600}
1985/11/11 New Retaining Rings Used In BrakeSaver Groups{1155}
1985/11/11 Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11 Caterpillar Offers Remanufactured Turbocharged 3208 Engines At Significant Savings{1000,7754}
1985/11/11 Two Different Piston Oil Ring Designs Used{1215}
1985/11/18 Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18 Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18 Filter Added To Drain Hole In Water Pumps{1361}
1985/11/25 Faster Response Water Temperature Regulators; Service Simplified{1350,1355}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.