Improvements to the Bezel of the Dashboard {7451}
- Integrated Toolcarrier:
- IT62H (S/N: M5G1-UP)
- Wheel Loader:
- 950GSeries II (S/N: BAA1-UP; AYB1-UP; AYD1-UP; AYL1-UP; AXR1-UP; AYS1-UP; AXX1-UP)
- 950H (S/N: N1A1-UP; M1G1-UP; J5J1-UP; K5K1-UP)
- 962GSeries II (S/N: BAB1-UP; BAC1-UP; BAD1-UP; AYE1-UP; AYG1-UP; AXS1-UP; AXY1-UP)
- 962H (S/N: N4A1-UP; M3G1-UP; J6J1-UP; K6K1-UP)
- 966GSeries II (S/N: AXJ1-UP; AXL1-UP; ANT1-UP; AWY1-UP; ANZ1-UP; AWZ1-UP)
- 966H (S/N: A6D1-UP; A6G1-UP; A6J1-UP)
- 972GSeries II (S/N: AXC1-UP; AXE1-UP; AXN1-UP; AWP1-UP; AXP1-UP; ANY1-UP)
- 972H (S/N: A7D1-UP; A7G1-UP; A7J1-UP)
- 980GSeries II (S/N: AXG1-UP; AWH1-UP; AYT1-UP)
- 980H (S/N: MHG1-UP; A8J1-UP; JMS1-UP)
Description of Change: Improvements have been made to the bezel that is located on the panel. The improvements will increase the durability of the bezel.
Adaptable To: Two improvements have been made to the bezel. The first improvement was to the alignment of the mounting holes on the 198-8772 Duct As. The second improvement was the 198-8774 Bezel. The bezel has been updated in order to include additional clearance at all mounting holes. A new 198-8774 Bezel can be installed in order to gain the proper clearance.
Show/hide table
Illustration 1 | g01623431 |
This change is adaptable with the Wheel Loaders that are listed above.
This change is effective with the following Wheel Loaders.
- (S/N: K6K386-UP)
- (S/N: M5G424-UP)
- (S/N: M3G475-UP)
- (S/N: A7D721-UP)
- (S/N: N4A1024-UP)
- (S/N: A7G1112-UP)
- (S/N: M1G1527-UP)
- (S/N: A6D1894-UP)
- (S/N: K5K2250-UP)
- (S/N: N1A2617-UP)
- (S/N: A6G3361-)
- (S/N: MHG4052-UP)
- (S/N: JMS4206-UP)
Caterpillar Information System:
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Monitoring System Monitoring System
3408E and 3412E Engines for Caterpillar Built Machines Electrical Connectors - Inspect
2008/08/18 Installation Of Software On A Replacement ECM {7610, 7620}
D6K Track-Type Tractor Mirror - If Equipped
320D Excavator Camera
994F Wheel Loader Camera - Video Camera (If Equipped)
2008/08/11 A New PIN Plate Is Being Installed {7000, 7557}
613G Wheel Tractor-Scraper System Pressure Release
E194 Event Codes Falsely Alert the Driver by Illuminating the Diagnostic Lamp on Wheel Tractor Scrapers{1901, 7620} E194 Event Codes Falsely Alert the Driver by Illuminating the Diagnostic Lamp on Wheel Tractor Scrapers{1901, 7620}
3408E and 3412E Engines for Caterpillar Built Machines Fuel Temperature Sensor
PL61 Pipelayer Machine Systems Hydraulic Accumulator (Boom, Hook) - Assemble
2008/10/06 Improvement for Hose Routing of 994 Wheel Loader Dual Tilt Hose Kickout {5057, 5104}
2008/12/01 Improvements To Brake Hose Assemblies Across Hitch {4257, 4269}
613G Wheel Tractor-Scraper Hydraulic System Parking Brake Actuator - Adjust
2008/08/25 An Improved Hydraulic Electronic Unit Injector (HEUI) Pump is Available {1714}
2008/08/18 A New Duct Assembly For The Alternator Is Being Installed {1405}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300} Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
2009/02/16 Correction to Disassembly and Assembly , "Front Suspension (Cylinder) - Disassemble" {7201}
2008/09/15 An Improved Engine Enclosure Support Strut is Now Available {7251}
Tier I Level Emissions Engine Repower for the D10N Track-Type Tractor {1000, 7000} Tier I Level Emissions Engine Repower for the D10N Track-Type Tractor {1000, 7000}
New Routing for Hydraulic Lines{3016, 3024} New Routing for Hydraulic Lines{3016, 3024}
D3K, D4K and D5K Track-Type Tractors Seat Belt
D7E Track-Type Tractor Power Train Final Drive - Disassemble
C9.3 Engine for D7E Track-Type Tractor Fuel System