Gear Pump (Power Train) - Disassemble
Start By:
- Remove the gear pump.
- Remove bolts (1) and bolts (2). Remove plate (3). Separate housing assembly (4).
- Remove coated washer (5) and steel washer (6) from bolts (2).
Show/hide table
Illustration 3 g01513973 - Remove O-ring seal (7) from plate (3).
Show/hide table
Illustration 4 g01514450 - Remove O-ring seal (8) from housing assembly (4).
Show/hide table
Illustration 5 g01514456 Show/hide tableIllustration 6 g01514464 - Remove gear (9), shaft (10), and gear (11) from housing assembly (4).
- Remove key (13) and remove shaft (12).
Show/hide table
Illustration 7 g01514472 - Remove sleeve bearings (14) from housing assembly (4).
Show/hide table
Illustration 8 g01514480 - Remove seals (15) and retaining ring (16) from housing assembly (4).
Show/hide table
Illustration 9 g01514502 - Remove sleeve bearings (17) from housing assembly (4).
Show/hide table
Illustration 1 | g01513894 |
Show/hide table
Illustration 2 | g01513965 |
Caterpillar Information System:
973K Track-Type Loader Power Train Track - Connect
973K Track-Type Loader Power Train Track - Separate
613G Wheel Tractor-Scraper Hydraulic System Ejector Cylinder
2008/05/05 New AccuGrade® Firmware is Now Available {7220, 7620}
D7E Track-Type Tractor Cooling Systems Hydraulic Oil Cooling System
904H Compact Wheel Loader Hydraulic and Steering System Worksheets
854K Wheel Dozer Machine Systems Front Frame and Rear Frame - Connect
D7E Track-Type Tractor Cooling Systems Power Train Oil Cooling System
904H Compact Wheel Loader Hydraulic and Steering System Implement Cycle Time - Check
C4.4 and C6.6 Engines for Caterpillar Built Machines Wastegate Solenoid - Test
993K Wheel Loader Vital Information Management System (VIMS) Cable Connections
973K Track-Type Loader Machine Systems Lift Cylinder - Remove and Install
D7E Track-Type Tractor Power Train Gear Pump (Power Train) - Assemble
C4.4 and C6.6 Engines for Caterpillar Built Machines Throttle Switch Circuit - Test
Procedure to Install Automotive Fuses{1408, 1417, 7278} Procedure to Install Automotive Fuses{1408, 1417, 7278}
973K Track-Type Loader Machine Systems Cab Tilt Cylinder - Remove and Install
2008/05/05 Improved Cab Insulation Is Now Available {7301}
D6N Track-Type Tractor Machine Systems Air Cleaner
D6N Track-Type Tractor Machine Systems Bottom Guard
3512C Engine for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
950H and 962H Wheel Loaders Electrohydraulic System Pressure Sensor
IT38H Integrated Toolcarrier and 938H Wheel Loader Braking and Hydraulic Fan System Gear Motor (Hydraulic Fan)
2008/04/14 An Improved Pressure Switch For The Secondary Steering Attachment is Now Available {1435}
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Piston Pump (Steering) - Test and Adjust