Track - Connect
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
B | 1P-3532 | Track Block Assembly | 1 |
C | 260-9412 | Lifting Device | 1 |
D | 1U-9202 | Lever Puller Hoist | 1 |
E | - | Loctite Graphite-50 Anti-Seize Lubricant | – |
- Attach Tooling (C) and Tooling (D) to track assembly (7).
Show/hide table
Illustration 2 g06177939 Show/hide tableIllustration 3 g06177937 - Attach Tooling (C) to the lower section of track assembly (7).
- Raise track assembly (7) from Tooling (B) and position track assembly (7) to master shoe (9). Apply Tooling (E) to the threads of bolts (8) and install bolts (8). Tighten bolts (8) to a torque of
339 ± 68 N·m (250 ± 50 lb ft) . Tighten bolts (8) for an extra 180 ± 5 degrees.Show/hide tableIllustration 4 g06239861 - Tighten valve (6) to a torque of
35 ± 5 N·m (26 ± 4 lb ft) . Adjust the track tension. Refer to Operation and Maintenance Manual, "Track - Adjust" for the correct procedure.Show/hide tableIllustration 5 g06239857 - Position cover assembly (5) and install bolts (4).
Show/hide table
Illustration 6 g01099092 - Position guard assemblies (3) and install bolts (1) and (2).
Show/hide table
Illustration 1 | g06177941 |
Caterpillar Information System:
973K Track-Type Loader Power Train Track - Separate
613G Wheel Tractor-Scraper Hydraulic System Ejector Cylinder
2008/05/05 New AccuGrade® Firmware is Now Available {7220, 7620}
D7E Track-Type Tractor Cooling Systems Hydraulic Oil Cooling System
904H Compact Wheel Loader Hydraulic and Steering System Worksheets
854K Wheel Dozer Machine Systems Front Frame and Rear Frame - Connect
D7E Track-Type Tractor Cooling Systems Power Train Oil Cooling System
904H Compact Wheel Loader Hydraulic and Steering System Implement Cycle Time - Check
C4.4 and C6.6 Engines for Caterpillar Built Machines Wastegate Solenoid - Test
993K Wheel Loader Vital Information Management System (VIMS) Cable Connections
973K Track-Type Loader Machine Systems Lift Cylinder - Remove and Install
973K Track-Type Loader Machine Systems Lift Arms - Remove and Install
D7E Track-Type Tractor Power Train Gear Pump (Power Train) - Disassemble
D7E Track-Type Tractor Power Train Gear Pump (Power Train) - Assemble
C4.4 and C6.6 Engines for Caterpillar Built Machines Throttle Switch Circuit - Test
Procedure to Install Automotive Fuses{1408, 1417, 7278} Procedure to Install Automotive Fuses{1408, 1417, 7278}
973K Track-Type Loader Machine Systems Cab Tilt Cylinder - Remove and Install
2008/05/05 Improved Cab Insulation Is Now Available {7301}
D6N Track-Type Tractor Machine Systems Air Cleaner
D6N Track-Type Tractor Machine Systems Bottom Guard
3512C Engine for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
950H and 962H Wheel Loaders Electrohydraulic System Pressure Sensor
IT38H Integrated Toolcarrier and 938H Wheel Loader Braking and Hydraulic Fan System Gear Motor (Hydraulic Fan)
2008/04/14 An Improved Pressure Switch For The Secondary Steering Attachment is Now Available {1435}