Ejector Cylinder
Show/hide table
Illustration 1 | g01521776 |
(1) Torque for bolt ... 1800 ± 200 N·m (1330 ± 150 lb ft)
(2) Apply 7M-7456 Bearing Mount Compound to the wiper seal groove prior to assembly.
(3) Apply clean grease to threads. Torque for head ... 600 ± 130 N·m (443 ± 95 lb ft)
(4) Lubricate the sealing lip lightly with the lubricant that is being sealed.
(A) Diameter of new piston over two lands ... 88.4 ± 0.03 mm (3.48 ± 0.001 inch)
(B) Bore of new cylinder assembly ... 88.90 ± 0.08 mm (3.500 ± 0.003 inch)
(C) Outer diameter of new rod ... 57.100 ± 0.038 mm (2.2480 ± 0.0015 inch)
(D) Bore of new head over four lands ... 57.48 ± 0.03 mm (2.263 ± 0.001 inch)
Caterpillar Information System:
2008/05/05 New AccuGrade® Firmware is Now Available {7220, 7620}
D7E Track-Type Tractor Cooling Systems Hydraulic Oil Cooling System
904H Compact Wheel Loader Hydraulic and Steering System Worksheets
854K Wheel Dozer Machine Systems Front Frame and Rear Frame - Connect
D7E Track-Type Tractor Cooling Systems Power Train Oil Cooling System
904H Compact Wheel Loader Hydraulic and Steering System Implement Cycle Time - Check
C4.4 and C6.6 Engines for Caterpillar Built Machines Wastegate Solenoid - Test
993K Wheel Loader Vital Information Management System (VIMS) Cable Connections
973K Track-Type Loader Machine Systems Lift Cylinder - Remove and Install
973K Track-Type Loader Machine Systems Lift Arms - Remove and Install
973K Track-Type Loader Machine Systems Lift Arm Bearings - Remove and Install
2008/04/21 New Engine Software Is Now Used {1901, 1902, 7620}
973K Track-Type Loader Power Train Track - Separate
973K Track-Type Loader Power Train Track - Connect
D7E Track-Type Tractor Power Train Gear Pump (Power Train) - Disassemble
D7E Track-Type Tractor Power Train Gear Pump (Power Train) - Assemble
C4.4 and C6.6 Engines for Caterpillar Built Machines Throttle Switch Circuit - Test
Procedure to Install Automotive Fuses{1408, 1417, 7278} Procedure to Install Automotive Fuses{1408, 1417, 7278}
973K Track-Type Loader Machine Systems Cab Tilt Cylinder - Remove and Install
2008/05/05 Improved Cab Insulation Is Now Available {7301}
D6N Track-Type Tractor Machine Systems Air Cleaner
D6N Track-Type Tractor Machine Systems Bottom Guard
3512C Engine for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
950H and 962H Wheel Loaders Electrohydraulic System Pressure Sensor