Track - Separate
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | - | Pin |
1 |
B | 1P-3532 | Track Block Assembly | 1 |
C | 260-9412 | Lifting Device | 1 |
D | 1U-9202 | Lever Puller Hoist | 1 |
- Remove bolts (1) and (2) to remove guard assemblies (3).
Show/hide table
Illustration 2 g06177928 - Remove cover (4).
Show/hide table
Illustration 3 g06177933 Show/hide tablePersonal injury can result from grease under high pressure.
The adjuster cylinder for the track is under high hydraulic pressure. Grease under high pressure can cause injury.
Do not visually inspect the adjuster to see if grease is released when the valve is opened. Check the rod to see that it moves to the rear into the front support on the track roller frame.
- Loosen valve (5) to release the track tension.
- Position Tooling (A) into a sprocket segment on the final drive. Start the machine and move the machine backward to loosen the track. Remove Tooling (A).
Show/hide table
Illustration 4 g06177935 - Move the machine until the center of master link (6) is on the centerline of the final drive.
Show/hide table
Illustration 5 g06177937 Show/hide tableIllustration 6 g06177939 - Position Tooling (B) to the lower section of track assembly (7). Attach Tooling (C) to the lower section of track assembly (7).
- Remove bolts (8) and master shoe (9). Lower track assembly (7) to Tooling (B).
Show/hide table
Illustration 7 g06177941 - Attach Tooling (C) and Tooling (D) to track assembly (7).
Show/hide table
Illustration 1 | g01099092 |
Caterpillar Information System:
613G Wheel Tractor-Scraper Hydraulic System Ejector Cylinder
2008/05/05 New AccuGrade® Firmware is Now Available {7220, 7620}
D7E Track-Type Tractor Cooling Systems Hydraulic Oil Cooling System
904H Compact Wheel Loader Hydraulic and Steering System Worksheets
854K Wheel Dozer Machine Systems Front Frame and Rear Frame - Connect
D7E Track-Type Tractor Cooling Systems Power Train Oil Cooling System
904H Compact Wheel Loader Hydraulic and Steering System Implement Cycle Time - Check
C4.4 and C6.6 Engines for Caterpillar Built Machines Wastegate Solenoid - Test
993K Wheel Loader Vital Information Management System (VIMS) Cable Connections
973K Track-Type Loader Machine Systems Lift Cylinder - Remove and Install
973K Track-Type Loader Machine Systems Lift Arms - Remove and Install
973K Track-Type Loader Machine Systems Lift Arm Bearings - Remove and Install
973K Track-Type Loader Power Train Track - Connect
D7E Track-Type Tractor Power Train Gear Pump (Power Train) - Disassemble
D7E Track-Type Tractor Power Train Gear Pump (Power Train) - Assemble
C4.4 and C6.6 Engines for Caterpillar Built Machines Throttle Switch Circuit - Test
Procedure to Install Automotive Fuses{1408, 1417, 7278} Procedure to Install Automotive Fuses{1408, 1417, 7278}
973K Track-Type Loader Machine Systems Cab Tilt Cylinder - Remove and Install
2008/05/05 Improved Cab Insulation Is Now Available {7301}
D6N Track-Type Tractor Machine Systems Air Cleaner
D6N Track-Type Tractor Machine Systems Bottom Guard
3512C Engine for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
950H and 962H Wheel Loaders Electrohydraulic System Pressure Sensor
IT38H Integrated Toolcarrier and 938H Wheel Loader Braking and Hydraulic Fan System Gear Motor (Hydraulic Fan)