Idlers (Track) - SystemOne Track
Show/hide table
| |
| Illustration 1 | g06154040 |
Show/hide table
| Specification for 308-4365 Track Idler Gp, | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| A | 1 | 6Y-0473 Clear Plug | The clear plug must not be recessed below the surface of the rubber stop after the idler is assembled. |
| Install the clear plug so that the end is even with the stopper assembly. The clear plug can extend up to |
|||
| B | - | - | Extension of the track idler shaft from the face of the seal collar on both sides is |
| C | - | - | Dimension for installing the stopper below the end of the shaft is |
| 1 | 2 | 107-4057 O-Ring Seal | Lubricate the O-ring seals and the track idler shaft lightly with the lubricant that is being sealed. |
| 2 | 24 | 5P-2546 Bolt | Torque to |
| 3 | 2 | 162-7863 Duo-Cone Seal Gp | The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Before assembly, apply a thin layer of oil to the contacting surfaces of the metal seal rings. The seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist. Refer to Special Instruction, SEHS8364, "Assembly and Installation of Conventional Duo-Cone Seals". |
| - | - | - | End play of the idler shaft: |
| Minimum is |
|||
| Maximum is |
|||
Caterpillar Information System:
994F Wheel Loader Machine Systems Control Valve (Main) - Install
C27 and C32 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Install
C4.4 Generator Set Engines Injector Solenoid Circuit - Test
24M Motor Grader Machine Systems Gear Pump (Secondary Steering) - Assemble
24M Motor Grader Machine Systems Gear Pump (Secondary Steering) - Disassemble
Accugrade® Grade Control System - CD700 Startup
992K Wheel Loader and 854K Wheel Dozer Power Train Transmission Control Valve - Remove
992K Wheel Loader and 854K Wheel Dozer Power Train General Information
854K Wheel Dozer and 992K Wheel Loader Radiator Core - Remove and Install
Tier III Level Emissions Engine Repower for a 637E Wheel Scraper {1000} Tier III Level Emissions Engine Repower for a 637E Wheel Scraper {1000}
2007/12/03 Improved PL1000T Hardware and Software is Now Available {7610}
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0041 - FMI 03
854K Wheel Dozer and 992K Wheel Loader Radiator Shroud - Remove
992K Wheel Loader and 854K Wheel Dozer Steering System Pump Performance (Steering) - Test
993K Wheel Loader Power Train Differential
992K Wheel Loader and 854K Wheel Dozer Power Train Transmission Control Valve - Install
D8T and D9T Track-Type Tractors MID 082 - CID 2212 - FMI 03
D8T and D9T Track-Type Tractors MID 082 - CID 2212 - FMI 05
D8T and D9T Track-Type Tractors MID 082 - CID 2206 - FMI 03
992K Wheel Loader and 854K Wheel Dozer Power Train Transmission Control Valve - Disassemble
D8T Track-Type Tractor Power Train Track Roller Frame
993K Wheel Loader Power Train Modulating Valve (Torque Converter Impeller Clutch)
993K Wheel Loader Power Train Modulating Valve (Torque Converter Lockup Clutch)
953D Track-Type Loader Power Train Steering - Test - Joystick Steering (S-Steer Configuration)