D8T Track-Type Tractor Power Train Caterpillar


Track Roller Frame

Usage:

D8T FCT


Illustration 1g03695041

Table 1
Specification for 310-2847 Telescoping Recoil Frame Gp and 310-2851 Telescoping Recoil Frame Gp 
Item  Qty  Part  Specification Description 
7X-0399 Bolt  Torque to 115 ± 20 N·m (85 ± 15 lb ft)
2H-3932 O-Ring Seal  Lubricate the seal lightly with the lubricant that is being sealed. 
9X-4584 Seal As  Clean all mating surfaces with a degreaser. Wipe all mating surfaces with a clean cloth in order to remove debris. Apply high strength/ high temperature anaerobic flange sealant on the mating surfaces before seal installation. 
24  8S-2331 Bolt  Torque to 270 ± 40 N·m (199 ± 30 lb ft)
9S-8009 O-Ring Plug  Install the O-ring plug after assembly of plate (5).
Torque to 120 ± 10 N·m (89 ± 7 lb ft)
4K-1388 O-Ring Seal  Lubricate the seal lightly with the lubricant that is being sealed. 
2D-1690 Ring Seal  Lubricate the bore lightly with the lubricant that is being sealed. 
Lubricate the sealing surface lightly with the lubricant that is being sealed. 

Caterpillar Information System:

992K Wheel Loader and 854K Wheel Dozer Power Train Transmission Control Valve - Disassemble
D8T and D9T Track-Type Tractors MID 082 - CID 2206 - FMI 03
D8T and D9T Track-Type Tractors MID 082 - CID 2212 - FMI 05
D8T and D9T Track-Type Tractors MID 082 - CID 2212 - FMI 03
992K Wheel Loader and 854K Wheel Dozer Power Train Transmission Control Valve - Install
993K Wheel Loader Power Train Differential
992K Wheel Loader and 854K Wheel Dozer Steering System Pump Performance (Steering) - Test
854K Wheel Dozer and 992K Wheel Loader Radiator Shroud - Remove
D8T Track-Type Tractor Power Train Idlers (Track) - SystemOne Track
994F Wheel Loader Machine Systems Control Valve (Main) - Install
C27 and C32 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Install
C4.4 Generator Set Engines Injector Solenoid Circuit - Test
993K Wheel Loader Power Train Modulating Valve (Torque Converter Impeller Clutch)
993K Wheel Loader Power Train Modulating Valve (Torque Converter Lockup Clutch)
953D Track-Type Loader Power Train Steering - Test - Joystick Steering (S-Steer Configuration)
993K Wheel Loader Electrohydraulic System Pressure Reducing Valve Pressure for Dead Engine Pilot Supply (Engine OFF) - Test and Adjust
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0041 - FMI 04
2007/12/03 A New Fuel Hose and a New Mounting Clip Are Now Used {1274}
993K Wheel Loader Electrohydraulic System Ride Control Signal Pressure - Check
992K Wheel Loader Electrohydraulic System Control Valve (Right)
2008/01/21 An Improved Bolted Joint is Now Available for the Lower Link of the Elevator {6210}
854K Wheel Dozer and 992K Wheel Loader Radiator Shroud - Install
992K Wheel Loader and 854K Wheel Dozer Power Train Transmission Control Valve - Assemble
D8T and D9T Track-Type Tractors MID 082 - CID 2212 - FMI 06
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.