Fuel Control Valve - Remove and Install - Low Pressure
Removal Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Turn OFF the gas supply.
- Disconnect the harness assembly from fuel control valve (2) .
Show/hide table
Illustration 1 | g01249489 |
- Remove bolts (1) and bolts (3) .
- Attach a suitable lifting device to fuel control valve (2). The weight of fuel control valve (2) is approximately 68 kg (150 lb).
- Remove bolts (4) and fuel control valve (2). Remove the gaskets from the tube assemblies.
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Attach a suitable lifting device to fuel control valve (2). The weight of fuel control valve (2) is approximately 68 kg (150 lb).
Show/hide table
Illustration 2 | g01249489 |
- Install the gaskets on the tube assemblies. Place fuel control valve (2) in position and install bolts (4) .
- Install bolts (1) and bolts (3). Tighten the bolts to a torque of 115 ± 20 N·m (85 ± 15 lb ft).
- Connect the harness assembly to fuel control valve (2) .
- Turn ON the gas supply.
Caterpillar Information System:
AccuGrade® GPS (CD700) Diagnostic Capabilities
AccuGrade® GPS (CD700) Service Tools
AccuGrade® GPS (CD700) General Information
AccuGrade® GPS (CD700) Glossary of Terms
G3508, G3512 and G3516 Engines Fuel Control Valve - Remove and Install
C280 Marine Propulsion Engines Throttle Position Sensor
G3508, G3512 and G3516 Engines Fuel Control Actuator - Remove and Install
G3508, G3512 and G3516 Engines Fuel Control Actuator - Remove and Install
C4.4 Industrial Engine Safety Messages
G3406 Engine Engine Air Precleaner - Check/Clean
3406C Engines for Caterpillar Built Machines Engine Oil Pan
Caterpillar On-Highway Diesel Engine Fluids Recommendations Extended Life Coolant Cooling System Maintenance
C4.4 Industrial Engine Model View Illustrations
C9 Urban Transit Bus Engine Maintenance Interval Schedule
C4.4 Industrial Engine Engine Description
G3500 A3 Engines Gas Engine Ignition
AccuGrade® GPS (CD700) Operational Problems
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 3509 - FMI 4
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 3509 - FMI 3
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System System Schematic
C15 Petroleum Generator Set Engines Fuel Temperature Sensor
AccuGrade® GPS (CD700) Receiver
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Determining Diagnostic Trouble Codes
C18 Marine and Marine Generator Set Engines Alternator and Regulator