Grease Tank (Automatic Lubrication) - Install
Installation Procedure
- Attach a suitable lifting device to grease tank (8). The weight of grease tank (8) is approximately 272 kg (600 lb). Install grease tank (8). Install bolts (9) to both sides.
Show/hide table
Illustration 1 | g01398847 |
Show/hide table
Illustration 2 | g01398848 |
- Connect hose assemblies (6) and (7). Disconnect harness assembly (3). Install bolt (4). Connect fitting (5).
Show/hide table
Illustration 3 | g01398846 |
- Install clips (2) .
Show/hide table
Illustration 4 | g01386562 |
- Install support (1) .
Show/hide table
Illustration 5 | g01386560 |
Caterpillar Information System:
993K Wheel Loader Lifting and Tying Down the Machine
Procedure to install 315-6321, 315-6323 Coupler Lines Group on Certain Wheel Loaders {5057, 6129} Procedure to install 315-6321, 315-6323 Coupler Lines Group on Certain Wheel Loaders {5057, 6129}
854K Wheel Dozer Machine Systems Gear Pump (Steering Oil Cooler) (Steering Pilot) - Assemble
854K Wheel Dozer Machine Systems Gear Pump (Steering Oil Cooler) (Steering Pilot) - Disassemble
854K Wheel Dozer Machine Systems Gear Pump (Implement Pilot) - Assemble
854K Wheel Dozer Machine Systems Gear Pump (Implement Pilot) - Disassemble
D8T, D9T, D10T and D11T Track-Type Tractors MID 082 - CID 0084 - FMI 08
D8T, D9T, D10T and D11T Track-Type Tractors MID 082 - CID 0084 - FMI 04
Bench Test Procedure for a 621E, 621F, 621G, 621S, 623E, 623F, 623G, 627E, 627F and 627G Wheel Tractor Transmission{3030, 3073} Bench Test Procedure for a 621E, 621F, 621G, 621S, 623E, 623F, 623G, 627E, 627F and 627G Wheel Tractor Transmission{3030, 3073}
AccuGrade® GPS (CD700) Configuration - Machine Radio
AccuGrade® GPS (CD700) Configuration - Receiver
D8T, D9T, D10T and D11T Track-Type Tractors MID 082 - CID 0084 - FMI 03
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Injection Lines - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Injection Pump - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Injector - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Line - Remove and Install
D11R Track-Type Tractor Hydraulic System Bulldozer Dual Tilt Cylinder
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Pump - Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Water Pump - Remove and Install - C1.5 and C2.2 Engines
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install