D6T Track-Type Tractor Machine Systems Caterpillar


Radiator Guard and Support

Usage:

D6T DJG



Illustration 1g01429050

(1) Torque for the eight bolts ... 105 ± 20 N·m (75 ± 15 lb ft)

(2) Torque for the two bolts ... 270 ± 40 N·m (200 ± 30 lb ft)




Illustration 2g01426844

(D) Inside diameter of sleeve bearing after assembly ... 95.473 ± 0.109 mm (3.7588 ± 0.0043 inch)

(E) Inside diameter of sleeve bearing after assembly ... 63.723 ± 0.084 mm (2.5088 ± 0.0033 inch)

(F) Inside diameter of sleeve bearing after assembly ... 50.162 ± 0.066 mm (1.9749 ± 0.0026 inch)

(G) Inside diameter of sleeve bearing after assembly ... 50.162 ± 0.066 mm (1.9749 ± 0.0026 inch)

Caterpillar Information System:

D6 Track Type Tractor Machine Systems Toggle Switch (Ground Level Shutdown)
854K Wheel Dozer and 992K Wheel Loader Electric Starting Motor - Remove and Install
319D Excavator Hydraulic System Main Hydraulic Pump Air - Purge
993K Wheel Loader Steering Frame Lock
2007/12/24 New Hoses and Hose Routing for the Steering Cylinder on the Right Side is Now Used {4304}
2007/12/10 New Design Improves Air Conditioning Lines {1808, 7320}
2007/12/24 An Improved Clamp is Now Used On Coolant Lines {1380}
D6T Track-Type Tractor Machine Systems Case and Frame
938H Wheel Loader and IT38H Integrated Toolcarrier Machine Systems Backup Alarm Circuit
993K Wheel Loader Electrohydraulic System Hydraulic System Operation
AD45B Underground Articulated Truck Additional Messages
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Lift Arms - Remove
993K Wheel Loader Power Train Torque Converter (Lockup)
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Position Sensor (Articulation Angle) - Adjust and Calibrate
374F Excavator Joystick Controls Alternate Patterns
994F Wheel Loader Machine Systems Check and Relief Valve (Main Hydraulic) - Remove
312D2 and 313D2 Excavators Bucket Linkage - Lubricate
854K Wheel Dozer and 992K Wheel Loader Engine from Torque Converter - Separate
2007/11/05 An Improved Seal For The Standard Final Drive Is Now Available {4050, 7561}
2007/12/31 Improvements for the Torque Converter {3101}
2007/11/05 A New Rear Hood Assembly is Available for Improved Durability {7251}
994F Wheel Loader Machine Systems Check and Relief Valve (Main Hydraulic) - Install
2007/11/05 Troubleshooting Procedure for the Engine Speed Sensor on Small Track-Type Tractors {1907}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184} Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.