3516 Generator Set Engine Caterpillar


Governor - Woodward 2301A Speed Control

Usage:

3516 5SJ



Illustration 1g03073656

Basic 2301A speed control system schematic

Table 1
Specification for 131-5453 Governor Control As    
Item     Qty     Part     Specification Description    
-     -     -     Supply voltage is 18 to 56 VDC.    
-     -     -     Maximum current output is 200mA.    
-     -     -     Signal range from magnetic pickup is 1 to 30 VAC.    
-     -     -     For detailed information on electronic governors, refer to the following service modules:
Service Manual, SENR4676, " 2301A Speed Control".
Service Manual, SENR3585, " 2301A Electric Governors (Load Sharing) for Generator Set and Industrial Engines".    

Caterpillar Information System:

CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Wiring Harness (Short Circuit) - Test
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Wiring Harness (Open Circuit) - Test
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Speed Sensor - Replace
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Electronic Control Unit - Replace
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Electronic Control Unit - Flash Program
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Electronic Control Unit - Configure
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Electrical Connector - Inspect
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 168 - FMI 4
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 168 - FMI 3
C280 Marine Auxiliary Engines Replacing the ECM
C27 and C32 Engines for Caterpillar Built Machines Speed/Timing Sensor
C280 Marine Propulsion Engines Customer Parameters Worksheet
Inspection and Salvage of Hydraulic Cylinder Components {7562} Inspection and Salvage of Hydraulic Cylinder Components {7562}
C-9 Industrial Engine Fuel Filter Base
C9 Industrial Engines Fuel Filter Base
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Connector Locations
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Diagnostic Capabilities
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System General Information
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Service Tools
C7 and C9 On-Highway Engines Emissions Parameters
C9 Industrial Engines Fuel Filter Base
3508C, 3512C and 3516C Marine Engines Alternator - Remove and Install
3508C, 3512C and 3516C Marine Engines Alternator Mounting Group - Remove and Install
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 158 - FMI 2
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.