C9 Industrial Engines Caterpillar


Fuel Filter Base

Usage:

C9 JLW


Illustration 1g01103193

(1) Put 155-0695 Thread Lock Compound on the tapered end of the stud to the following distance. ... 10.2 mm (0.40 inch)

(2) Distance from the sealing surface of the filter base to the end of the stud ... 22.1 ± 1.3 mm (0.87 ± 0.05 inch)

(3) Torque for stud ... 70 ± 15 N·m (50 ± 11 lb ft)

(4) Sealing surface of the stud ... 11.481 mm (0.452 inch)

Note: Do not damage this surface (4).

Caterpillar Information System:

C7 and C9 On-Highway Engines Emissions Parameters
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Service Tools
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System General Information
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Diagnostic Capabilities
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Connector Locations
C9 Industrial Engines Fuel Filter Base
C-9 Industrial Engine Fuel Filter Base
Inspection and Salvage of Hydraulic Cylinder Components {7562} Inspection and Salvage of Hydraulic Cylinder Components {7562}
3516 Generator Set Engine Governor - Woodward 2301A Speed Control
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Wiring Harness (Short Circuit) - Test
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Wiring Harness (Open Circuit) - Test
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Speed Sensor - Replace
3508C, 3512C and 3516C Marine Engines Alternator - Remove and Install
3508C, 3512C and 3516C Marine Engines Alternator Mounting Group - Remove and Install
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 158 - FMI 2
C18 Marine Auxiliary and Marine Generator Set Engines Engine Oil Filter Base
C27 and C32 Engines for Caterpillar Built Machines Fuel Transfer Pump
G3500 A3 Engines Ignition System
C175 Generator Sets Fuel System Secondary Filter - Replace
Update of Parameters for Throttle Inputs During Commissioning Procedure{1901, 4490} Update of Parameters for Throttle Inputs During Commissioning Procedure{1901, 4490}
C18 Marine and Marine Generator Set Engines Engine Oil Filter Base
2006/03/13 The Heater and Air Conditioner Fan Motor has been Enhanced to Improve Motor Life {5927, 7304, 7320}
G3500 A3 Engines Location of Components
G3500 A3 Engines Carburetor
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.