Connector Locations
The Electrical System Schematic, Parts Manual and Operation and Maintenance Manual for the vehicle that is being serviced should be used to locate electrical components and connectors.
The following information is a guide to reading the tables on the back of the Electrical System Schematic.
- The "Component Location" table uses white circles to mark the locations in the profile of the vehicle and in the area views. Alphabetical letters in the "Machine Location" column indicate a general area of the vehicle. Refer to the corresponding footnote at the end of the table for a description of the location.
- The "Harness Connector Location" table uses white circles to mark the locations in the general view and in the area views. Alphabetical letters in the "Machine Location" column indicate a general area of the vehicle. Refer to the corresponding footnote at the end of the table for a description of the location.
Show/hide table
Illustration 1 | g01522216 |
(5) J3 Connector (6) J2 Connector (7) J1 Connector |
Harness Connectors
Show/hide table
Illustration 2 | g01255959 |
Electronic Control Unit (ECU) |
Show/hide table
Illustration 3 | g01255962 |
J1 and J2 Harness Connectors that mate to the ECU |
OEM Connector
This connector routes power and switch inputs to the ECU. Crimping and wire specifications for this connector are similar to the 70 terminal connector. The figures below show pin, socket locations, and keys for the 24-pin connector.
Show/hide table
Illustration 4 | g01255115 |
J3 Harness Connector |
Caterpillar Information System:
C9 Industrial Engines Fuel Filter Base
C-9 Industrial Engine Fuel Filter Base
Inspection and Salvage of Hydraulic Cylinder Components {7562} Inspection and Salvage of Hydraulic Cylinder Components {7562}
3516 Generator Set Engine Governor - Woodward 2301A Speed Control
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Wiring Harness (Short Circuit) - Test
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Wiring Harness (Open Circuit) - Test
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Speed Sensor - Replace
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Electronic Control Unit - Replace
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Electronic Control Unit - Flash Program
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Electronic Control Unit - Configure
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Electrical Connector - Inspect
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 168 - FMI 4
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Diagnostic Capabilities
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System General Information
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Service Tools
C7 and C9 On-Highway Engines Emissions Parameters
C9 Industrial Engines Fuel Filter Base
3508C, 3512C and 3516C Marine Engines Alternator - Remove and Install
3508C, 3512C and 3516C Marine Engines Alternator Mounting Group - Remove and Install
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 158 - FMI 2
C18 Marine Auxiliary and Marine Generator Set Engines Engine Oil Filter Base
C27 and C32 Engines for Caterpillar Built Machines Fuel Transfer Pump
G3500 A3 Engines Ignition System
C175 Generator Sets Fuel System Secondary Filter - Replace