D7E Track-Type Tractor Systems Caterpillar


Ripper Mounting

Usage:

D7E HKA


Illustration 1g03739864

Table 1
Specification for 245-1211 Ripper Frame 
Item   Qty  Part  Specification Description 
296-1374 Pin As  Diameter is 76.00 to 76.15 mm (2.992 to 2.998 inch)
270-0599 Pin As  Diameter is 76.00 to 76.15 mm (2.992 to 2.998 inch)
16  As required, use 4T-3522 Washer with thickness of 3 mm (0.1 inch) in order to center the ripper frame. 
270-0597 Pin As  Diameter is 89.75 to 89.90 mm (3.533 to 3.539 inch)
10  7X-2563 Bolt  Torque to 520 ± 70 N·m (384 ± 52 lb ft)
7T-3746 Bushing  Bore after assembly is 89.40 ± 0.10 mm (3.520 ± 0.004 inch).
Installation depth is 8.0 ± 0.5 mm (0.31 ± 0.02 inch)
270-0598 Pin As  Diameter is 89.75 to 89.90 mm (3.533 to 3.539 inch)

Caterpillar Information System:

924H, 924HZ, 928HZ and 930H Wheel Loaders Ride Control Accumulator - Check
924H, 924HZ, 928HZ and 930H Wheel Loaders Bucket Lower Pivot Bearings - Lubricate
924H, 924HZ, 928HZ and 930H Wheel Loaders Steering Cylinder Bearings - Lubricate
924H, 924HZ, 928HZ and 930H Wheel Loaders Axle Oscillation Bearings - Lubricate
924H, 924HZ, 928HZ and 930H Wheel Loaders Drive Shaft Support Bearing - Lubricate
924H, 924HZ, 928HZ and 930H Wheel Loaders Bucket Linkage and Loader Cylinder Bearings - Lubricate
924H, 924HZ, 928HZ and 930H Wheel Loaders Tire Inflation - Check
924H, 924HZ, 928HZ and 930H Wheel Loaders Capacities (Refill)
924H, 924HZ, 928HZ and 930H Wheel Loaders Rated Load
924H, 924HZ, 928HZ and 930H Wheel Loaders Mirror - if equipped
924H, 924HZ, 928HZ and 930H Wheel Loaders Sound Information and Vibration Information
D7E Track-Type Tractor Monitoring System Monitoring System
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Hydraulic and Steering System Hydraulic Oil Contamination - Test
2007/10/08 Provide Proper Strain Relief for the 145-7028 Temperature Sensor {301T, 3194, 509T}
2007/10/22 Improved Bevel Gear and Pinion Service Life {3254, 3256}
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train Oscillating Axle Housing
Procedure for the Removal and the Replacement of the Engine Enclosure on the 631G and 637G Wheel Tractor-Scrapers{7251, 7405, 7553, 7557} Procedure for the Removal and the Replacement of the Engine Enclosure on the 631G and 637G Wheel Tractor-Scrapers{7251, 7405, 7553, 7557}
AD55B Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 1401 - FMI 05
AD55B Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 1401 - FMI 06
AD55B Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 1401 - FMI 11
AD55B Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 1402 - FMI 03
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train Output Transfer Gears
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train Speed Sensor (Torque Converter Output) (Transmission Intermediate Output)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System Solenoid Valve and Mounting (Hydraulic Lockout)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.