Monitoring System
Show/hide table
Illustration 1 | g03335361 |
Monitoring System |
When the engine key start switch is turned to the ON position, the monitoring system continuously monitors all machine systems via the following components:
- Sensors
- Electronic control modules
- Monitoring system components
If a warning event occurs, a message will appear on the LCD screen of the monitoring system display. The display is located in the front operator console. The corresponding action lamp will illuminate. An audible alarm will sound for level 3 warning.
The monitoring system provides the following information via the LCD screen of monitoring system display:
- Operating characteristics of the machine
- Diagnostics
- Service intervals
- Warning events
- Modes of operation
The monitoring system display allows the technician to perform the following actions:
- View logged events and diagnostic codes.
- Clear logged events and diagnostic codes.
- View and change the preferences of the operator.
- Change the parameters.
- View the status of the system components.
- View the parameters of the system.
- Calibrate the steering.
- Calibrate the implements.
- Calibrate the power train.
Caterpillar Information System:
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System Pressure Sensor (Brake Oil)
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems Loader Frame and Rear Frame - Separate
924H, 924HZ, 928HZ and 930H Wheel Loaders Tire Inflation Pressure
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System Pressure Sensor (Brake System Oil)
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train Differential (Standard)
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems Lift Kickout Control - Remove and Install
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train Bevel Gear and Pinion (Fixed Axle) (Oscillating Axle)
C18 Engine for Caterpillar Built Machines Configuration Parameters
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System Vane Pump (Implement)
924H, 924HZ, 928HZ and 930H Wheel Loaders Specifications
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train Axle Oil Cooler Pump and Motor
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train Pressure Switch (Axle Oil)
924H, 924HZ, 928HZ and 930H Wheel Loaders Sound Information and Vibration Information
924H, 924HZ, 928HZ and 930H Wheel Loaders Mirror - if equipped
924H, 924HZ, 928HZ and 930H Wheel Loaders Rated Load
924H, 924HZ, 928HZ and 930H Wheel Loaders Capacities (Refill)
924H, 924HZ, 928HZ and 930H Wheel Loaders Tire Inflation - Check
924H, 924HZ, 928HZ and 930H Wheel Loaders Bucket Linkage and Loader Cylinder Bearings - Lubricate
924H, 924HZ, 928HZ and 930H Wheel Loaders Drive Shaft Support Bearing - Lubricate
924H, 924HZ, 928HZ and 930H Wheel Loaders Axle Oscillation Bearings - Lubricate
924H, 924HZ, 928HZ and 930H Wheel Loaders Steering Cylinder Bearings - Lubricate
924H, 924HZ, 928HZ and 930H Wheel Loaders Bucket Lower Pivot Bearings - Lubricate
924H, 924HZ, 928HZ and 930H Wheel Loaders Ride Control Accumulator - Check
D7E Track-Type Tractor Systems Ripper Mounting