924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System Caterpillar


Pressure Sensor (Brake System Oil)

Usage:

928HZ BYD



图 1g00904362

(1) 压力传感器的安装扭矩 ... 20 ± 2 N·m (15 ± 1 lb ft)

压力传感器的最大工作油压 ... 34500 kPa (5000 psi)

压力传感器的电源电压 ... 5.0 ± 0.25 VDC

压力传感器的最大输入电流 ... 10 mA

压力传感器的最大输出电流 ... 1.5 mA

−40 °C (−40 °F) - 0 °C (32 °F) 时的最大压力精确度 ... ± 3 %

0 °C (0 °F) - 100 °C (212 °F) 时的最大压力精确度 ... ± 1 %

100 °C (212 °F) - 120 °C (248 °F) 时的最大压力精确度 ... ± 1.5 %

(A) 电源电压

(B) 接地

(C) 信号

Caterpillar Information System:

924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train Differential (Standard)
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems Lift Kickout Control - Remove and Install
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train Bevel Gear and Pinion (Fixed Axle) (Oscillating Axle)
C18 Engine for Caterpillar Built Machines Configuration Parameters
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System Vane Pump (Implement)
924H, 924HZ, 928HZ and 930H Wheel Loaders Specifications
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train Axle Oil Cooler Pump and Motor
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train Pressure Switch (Axle Oil)
AD55B Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 1401 - FMI 03
Bench Test Procedure for a 988G and 988H Wheel Loader Torque Converter{3101} Bench Test Procedure for a 988G and 988H Wheel Loader Torque Converter{3101}
Bench Test Procedure For A 992C and 992D Wheel Loader Torque Converter{3101} Bench Test Procedure For A 992C and 992D Wheel Loader Torque Converter{3101}
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Bulldozer Blade - Angle
924H, 924HZ, 928HZ and 930H Wheel Loaders Tire Inflation Pressure
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems Loader Frame and Rear Frame - Separate
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System Pressure Sensor (Brake Oil)
D7E Track-Type Tractor Monitoring System Monitoring System
924H, 924HZ, 928HZ and 930H Wheel Loaders Sound Information and Vibration Information
924H, 924HZ, 928HZ and 930H Wheel Loaders Mirror - if equipped
924H, 924HZ, 928HZ and 930H Wheel Loaders Rated Load
924H, 924HZ, 928HZ and 930H Wheel Loaders Capacities (Refill)
924H, 924HZ, 928HZ and 930H Wheel Loaders Tire Inflation - Check
924H, 924HZ, 928HZ and 930H Wheel Loaders Bucket Linkage and Loader Cylinder Bearings - Lubricate
924H, 924HZ, 928HZ and 930H Wheel Loaders Drive Shaft Support Bearing - Lubricate
924H, 924HZ, 928HZ and 930H Wheel Loaders Axle Oscillation Bearings - Lubricate
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.