- Track-Type Loader:
- 963C (S/N: BBD1-3047; 2DS1-UP)
Description of Change: The mounting plates on the tilt cylinders have been improved. A new plate can be added in order to improve the performance of the mounting plate for the tilt cylinder.
Adaptable To:
Illustration 1 | g01346993 |
(1) Location of the new plate |
Illustration 2 | g01347006 |
(2) 7P-2211 Plate (3) 7P-2212 Plates (4) 7P-2213 Plate |
The 7P-2212 Plates can crack. Cracks can start at the 7P-2213 Plate or the 7P-2211 Plate at the end of the weld.
- Fabricate the plate in Illustration 3 and Illustration 4.
Illustration 3 | g01345054 |
Top view (A) 240.0 mm (9.44 inch) (B) 210.0 mm (8.27 inch) (C) 150.0 mm (5.91 inch) (D) 125.0 mm (4.92 inch) (E) 50.0 mm (1.97 inch) (F) 100.0 mm (3.94 inch) diameter (G) 100.0 mm (3.94 inch) radius (2 places) (H) 6.0 mm (0.24 inch) radius (8 places) (K) 2.5 mm (0.10 inch) radius (L) 25.0 mm (0.98 inch) (M) 130.0 mm (5.11 inch) (N) 184.0 mm (7.24 inch) (P) 245.0 mm (9.63 inch) (R) 306.0 mm (12.05 inch) (S) 360.0 mm (14.17 inch) (T) 460.0 mm (18.11 inch) (U) 490.0 mm (19.29 inch) |
Illustration 4 | g01345253 |
Side view (AA) 8 mm (0.32 inch) |
- Weld the 7P-2213 Plate or the 7P-2211 Plate if the plates are not completely broken. Then weld the new plate to the machine.
- If the 7P-2213 Plate or the 7P-2211 Plate are broken then place new parts on the machine.
- Weld the fabricated plate to plate (2) .