Fan Drive - Disassemble
Disassembly Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 8T-0643     | Bolt     | 1     |
B     | 1P-1863     | Retaining Ring Pliers     | 1     |
Start By:
- Remove the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Remove".
- Remove spacer (7) from shaft (6) .
Show/hide table
Illustration 1 | g01310219 |
- Remove spring pin (8) from shaft (6) .
- Use Tooling (B) in order to remove retaining ring (5) .
- Remove idler pulley assembly (4) from shaft (3) .
- Remove spring pin (2) from bracket assembly (1) and shaft (3) .
- Remove shaft (3) from bracket assembly (1) .
- Remove bolt (11) and washer (10). Remove belt tensioner (9) from bracket assembly (1) .
- Remove bearings (12) from idler pulley assembly (4) .
Show/hide table
Illustration 2 | g01310246 |
- Use a suitable press in order to remove shaft (6) from bracket assembly (1) .
Show/hide table
Illustration 3 | g01310248 |
- Remove Tooling (A) from the fan drive.
Note: Tooling (A) was installed in the Disassembly and Assembly, "Fan Drive - Remove".
Show/hide table
Illustration 4 | g01310254 |
- Remove fan pulley hub (14) from fan pulley (13) .
- Remove lip seal (15), bearing cone (16), and bearing cup (17) from fan pulley hub (14) .
Show/hide table
Illustration 5 | g01310257 |
- Remove bearing cone (20), spacer (19), and bearing cup (18) from fan pulley hub (14) .
Caterpillar Information System:
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Fan Drive - Install
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Fan Drive - Remove
D7G and D7G Series II Track-Type Tractors Power Train Sprocket Segment - Remove and Install
Installation of Pressurizer Assembly on T-Series Track-Type Tractors{7342} Installation of Pressurizer Assembly on T-Series Track-Type Tractors{7342}
AD55B Underground Articulated Truck Power Train Electronic Control Module (Power Train/Chassis)
AD55B Underground Articulated Truck Power Train Power Train Electrical System
AD55B Underground Articulated Truck Power Train General Information
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 0190 - FMI 08
657G Wheel Tractor-Scraper Wheel Tractor Power Train Gear Pump (Transmission) - Assemble
657G Wheel Tractor-Scraper Wheel Tractor Power Train Gear Pump (Transmission) - Disassemble
C15 On-Highway Engine Fuel Quality - Test
770 and 772 Off-Highway Truck Chassis Electronic Control System Service Tools
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Fan Drive - Assemble
963D Track-Type Loader Machine Systems Hydraulic Tank - Disassemble
963D Track-Type Loader Machine Systems Hydraulic Tank - Assemble
Bench Test Procedure for a D6C, D6D, D6E, D6G, and D6G Series II Track-Type Tractor Transmission{3030, 3073} Bench Test Procedure for a D6C, D6D, D6E, D6G, and D6G Series II Track-Type Tractor Transmission{3030, 3073}
D6K Track-Type Tractor Hydraulic System Control Valve (Bulldozer Angle)
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 0247 - FMI 09
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser) General Information
IT38H Integrated Toolcarrier and 938H Wheel Loader Hydraulic Tank Breaker Relief Valve - Clean
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Transmission Oil Cooler - Remove - Engine in Chassis
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Transmission Oil Cooler - Install - Engine in Chassis
963D Track-Type Loader Machine Systems Main Control Valve - Remove
D6G Series II Track-Type Tractor Power Train Equalizer Bar - Remove