Fan Drive - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 8T-0643     | Bolt     | 1     |
Start By:
- Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Note: The cooling system package was removed for photographic purposes.
- Install Tooling (A) to fan drive (1) in order to hold fan drive (1) together during the removal procedure.
Show/hide table
Illustration 1 | g01309632 |
- Attach a suitable lifting device to fan drive (1). The weight of fan drive (1) is approximately 27 kg (60 lb).
- Remove O-ring seal (2) .
- Remove bolt (3) .
- Remove fan drive (1) .
- Remove bolts (5) .
Show/hide table
Illustration 2 | g01309676 |
- Set refrigerant compressor (6) out of the way.
- Remove bolts (4) and remove bolts (9) .
- Remove bolt (8) .
- Remove bracket assembly (7) .
Caterpillar Information System:
D7G and D7G Series II Track-Type Tractors Power Train Sprocket Segment - Remove and Install
Installation of Pressurizer Assembly on T-Series Track-Type Tractors{7342} Installation of Pressurizer Assembly on T-Series Track-Type Tractors{7342}
AD55B Underground Articulated Truck Power Train Electronic Control Module (Power Train/Chassis)
AD55B Underground Articulated Truck Power Train Power Train Electrical System
AD55B Underground Articulated Truck Power Train General Information
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 0190 - FMI 08
657G Wheel Tractor-Scraper Wheel Tractor Power Train Gear Pump (Transmission) - Assemble
657G Wheel Tractor-Scraper Wheel Tractor Power Train Gear Pump (Transmission) - Disassemble
C15 On-Highway Engine Fuel Quality - Test
770 and 772 Off-Highway Truck Chassis Electronic Control System Service Tools
657G Wheel Tractor-Scraper Wheel Tractor Power Train Transmission, Torque Converter, Transfer Gears and Differential - Install
657G Wheel Tractor-Scraper Wheel Tractor Power Train Transmission, Torque Converter, Transfer Gears and Differential - Remove
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Fan Drive - Install
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Fan Drive - Disassemble
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Fan Drive - Assemble
963D Track-Type Loader Machine Systems Hydraulic Tank - Disassemble
963D Track-Type Loader Machine Systems Hydraulic Tank - Assemble
Bench Test Procedure for a D6C, D6D, D6E, D6G, and D6G Series II Track-Type Tractor Transmission{3030, 3073} Bench Test Procedure for a D6C, D6D, D6E, D6G, and D6G Series II Track-Type Tractor Transmission{3030, 3073}
D6K Track-Type Tractor Hydraulic System Control Valve (Bulldozer Angle)
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 0247 - FMI 09
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser) General Information
IT38H Integrated Toolcarrier and 938H Wheel Loader Hydraulic Tank Breaker Relief Valve - Clean
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Transmission Oil Cooler - Remove - Engine in Chassis
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Transmission Oil Cooler - Install - Engine in Chassis