992K Wheel Loader Caterpillar


Axle Oscillation Bearings - Lubricate

Usage:

992K H4C
车桥摆动轴承的两个油嘴位于机器左边的铰接点旁边。


图 1g01300491

  1. 加注润滑剂前,先擦净油嘴。

  2. 通过两个油嘴加注润滑油,直到轴承周围溢出润滑油。

  3. 检查轴承周围溢出的润滑油,以确保正确加注。

Caterpillar Information System:

2007/10/15 A New Procedure for the Location and Adjusting the Bucket Stop is Now Available {6001, 6107, 6119}
D7G and D7G Series II Track-Type Tractors Power Train Gear Pump (Transmission) - Assemble
D7G and D7G Series II Track-Type Tractors Power Train Gear Pump (Transmission) - Disassemble
2006/10/23 Improved Head Gasket {1100, 1124}
2006/10/30 Replacement Flash File for Low Oil Pressure and Elevated Idle {1902, 7620}
2006/09/04 A New Torque Specification For the Cap Nuts on Fuel Injectors is Now Used {1251, 1254, 1290, 1713}
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Diagnostic Capabilities
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Event Code List
992K Wheel Loader Articulation Bearings - Lubricate
854K Wheel Dozer Capacities (Refill)
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Switch Circuits
D6N Track-Type Tractor Hydraulic System Piston Pump (Steering)
657G Wheel Tractor-Scraper Wheel Tractor Power Train Differential and Bevel Gear - Disassemble
D6N Track-Type Tractor Hydraulic System Piston Pump (Implement) - Test and Adjust
657G Wheel Tractor-Scraper Wheel Tractor Power Train Transfer Gears - Disassemble
657G Wheel Tractor-Scraper Wheel Tractor Power Train Transfer Gears - Assemble
D6G Series II Track-Type Tractor Machine Systems Gear Pump (Implement) - Disassemble
D6G Series II Track-Type Tractor Machine Systems Gear Pump (Implement) - Assemble
834H Wheel Dozer and 836H Landfill Compactor Sound Information and Vibration Information
C175-16 Locomotive Engine ECM - Replace
657G Wheel Tractor-Scraper Wheel Tractor Power Train Torque Converter - Disassemble
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Connector Contact Description
D6N Track-Type Tractor Hydraulic System Ripper Control
Retrofit To SystemOne Track Guiding Arrangements{4177} Retrofit To SystemOne Track Guiding Arrangements{4177}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.