854K Wheel Dozer Caterpillar


Capacities (Refill)

Usage:

854K 221

表 1
近似再加注容量 
部位或系统    美制加仑 
发动机曲轴箱  120  31.7 
变速箱  169  44.6 
液压油箱(机具和风扇驱动马达)  326  86 
液压油箱(转向和制动器)  159  42 
冷却系统  268  70.8 
燃油箱  1610  425 
前面差速器和终传动(1)   360  95 
后面差速器和终传动(1)   345  91 
(1) 允许加添 4.7 L (5 qt) 容量的 1U-9891 液压油添加剂。

Caterpillar Information System:

816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Switch Circuits
D6N Track-Type Tractor Hydraulic System Piston Pump (Steering)
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Power Supply Circuit of Electronic Control Module
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer System Schematic
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Electronic Control Module (ECM) - Replace
D6N Track-Type Tractor Hydraulic System Piston Motor (Steering)
992K Wheel Loader Operator Controls
D6N Track-Type Tractor Hydraulic System Piston Pump (Steering)
D6N Track-Type Tractor Hydraulic System Pilot Valve (Steering)
D6N Track-Type Tractor Hydraulic System Oil Filter (Steering)
D6N Track-Type Tractor Hydraulic System Location of Steering Components
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Electronic Control Module (ECM) - Configure
992K Wheel Loader Articulation Bearings - Lubricate
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Event Code List
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Diagnostic Capabilities
2006/09/04 A New Torque Specification For the Cap Nuts on Fuel Injectors is Now Used {1251, 1254, 1290, 1713}
2006/10/30 Replacement Flash File for Low Oil Pressure and Elevated Idle {1902, 7620}
2006/10/23 Improved Head Gasket {1100, 1124}
D7G and D7G Series II Track-Type Tractors Power Train Gear Pump (Transmission) - Disassemble
D7G and D7G Series II Track-Type Tractors Power Train Gear Pump (Transmission) - Assemble
2007/10/15 A New Procedure for the Location and Adjusting the Bucket Stop is Now Available {6001, 6107, 6119}
992K Wheel Loader Axle Oscillation Bearings - Lubricate
657G Wheel Tractor-Scraper Wheel Tractor Power Train Differential and Bevel Gear - Disassemble
D6N Track-Type Tractor Hydraulic System Piston Pump (Implement) - Test and Adjust
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.