1985/05/27 Caterpillar

Remanufactured Bare Cylinder Heads (U.S. And Canada){1101,7754}

Usage:

Remanufactured Bare Cylinder Heads, which include plugs, inserts and guides are available for all Caterpillar engines. Bare heads will allow you to configure cylinder heads in your Service Department to reflect customer and territory needs. You will also receive quality repair for a fraction of the new cylinder head cost. Remanufactured Bare Cylinder Head prices range from 10 to 30% of a new head when a core, that is not cracked, is returned. When a cracked, damaged or previously welded core is returned, prices range from 30 to 60% of new.

Caterpillar has a commitment to offer quality, value-priced products and Remanufactured Bare Cylinder Heads are no exception. Since you can never be sure of welding quality, Caterpillar will not weld cylinder head castings without a controllable process. We back this guarantee with the same six month unlimited mileage-/hour warranty offered on new cylinder heads.

Part numbers and additional information on Caterpillar Remanufactured Bare Cylinder Heads can be found in IRM 84-19.

Caterpillar Information System:

1985/05/27 Rebuilt Axial Piston Pumps{5070}

1985/05/20 New Temperature Recorder Group (Crayons) Indicate Surface Temperature{0776}

1985/05/20 New Spark Resistant Air Starting Motor Group Has Serviceable Parts{1451}

1985/05/20 Air Conditioner Compressor Mounting Bracket Improved{1802}

1985/05/20 Incorrect Air Compressor Installation Can Cause An Early Failure{1800,1803,1804}

1985/05/13 Check For Interference Between Water Temperature Regulator And Cylinder Head Bore{1355}

1985/05/13 Improved Remote Shutoff Group Has New Pressure Control Group{1050,1078,1085}

1985/05/13 New Oil Pressure And Water Temperature Alarm Contactor Group Used{7400,7407,7417}

1985/05/13 Hydramechanical Governor Fuel Setting Information{1289,1250}

1985/05/06 Remanufactured Fuel Ratio Controls Are Available In U.S. And Canada{1278,7754}

1985/05/06 Be Sure Correct Piston Rings Are Used On 3400 Series Engines{1215,1214}

1985/05/06 New Clamp Added To Right Hand Instrument Panel Fuel Filter Differential Lines Group{7451,7456,7450}

1985/05/27 Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}

1985/05/27 Obtaining Correct Bolt Torque On Ground Engaging Tools{6800,7553}

1985/05/27 Correct Procedure To Check Tapered Bearing End Clearances{7551,3257,3300,3000}

1985/06/03 Improved Serviceability Of Water Cooled Exhaust Manifolds{1350,1355}

1985/06/03 Water Cooled Exhaust Elbow Groups Available{1052,1061}

1985/06/03 Preventing Skin Irritation From Petroleum Test Fluids{0353}

1985/06/03 New Crankshaft Seals Used{1160,1161,1202}

1985/06/03 Excessive Antifreeze Concentrations Can Cause Overheating{1350,1101}

1985/06/03 Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}

1985/06/03 Improving Block Load Response{7002}

1985/06/03 Engine Slobbering{1059,1050}

1985/06/10 New Degree Wheel Available For Measuring Torque Turn Angles{0600}