1. Home
  2. Caterpillar
  3. Operation and Maintenance Manual
  4. #i02577966

D7G Series 2 and D7G Series II Track-Type Tractors Caterpillar


Transmission Magnetic Screen - Clean

Usage:

D7G 7MB

  • Lepaskan lantai dasar.
      Show/hide table

      Ilustrasi 1g01291463

      Tampak kanan

      Show/hide table

      Ilustrasi 2g01282199

      (1) Penutup

      (2) Saringan

      (3) Susunan magnet

    1. Lepaskan penutup (1) .

    1. Lepaskan saringan (2) dan susunan magnet (3) .

    1. Cuci saringan dan magnet dalam larutan yang bersih dan tidak mudah terbakar. Bersihkan magnet dengan menggunakan kain lap, sikat bulu kaku atau udara bertekanan.

    1. Pasang magnet.

    1. Pasang saringan.

    1. Periksa pegas dan seal. Bila seal telah rusak, pasang seal yang baru.

    1. Pasang penutup dan lantai dasar.

    1. Hidupkan engine. Jalankan engine pada KECEPATAN TERENDAH.
      Show/hide table

      Ilustrasi 3g01290342
      Show/hide table

      Ilustrasi 4g01291470
      Show/hide table

      Ilustrasi 5g01282066

      (A) Engine masih dingin

      (B) Engine telah hangat

    1. Buka pintu. Pertahankan ketinggian oli antara tanda ADD dan tanda FULL pada dipstick oli transmisi (4) .

    1. Lepaskan tutup pengisian oli transmisi (5). Apabila diperlukan, lakukan penambahan oli.

    1. Pasang tutup pengisian oli dan tutup pintu.

    • Caterpillar Information System:

    2006/08/21 A Improved Alternator Guard is Used {7310}
    D7G Series 2 and D7G Series II Track-Type Tractors Track - Check/Adjust
    988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Pressure Sensor (Automatic Lubrication)
    D7G Series 2 and D7G Series II Track-Type Tractors Engine Oil and Filter - Change
    D7G Series 2 and D7G Series II Track-Type Tractors Engine Oil Level - Check
    D6K Track-Type Tractor Power Train Track Drive Motor - Assemble
    D6K Track-Type Tractor Power Train Track Drive Motor - Disassemble
    D7G Series 2 and D7G Series II Track-Type Tractors Engine Air Filter Primary Element - Clean/Replace
    824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Relief Valve (Torque Converter Inlet)
    953D Track-Type Loader Machine Systems Tilt Cylinder - Remove and Install
    953D Track-Type Loader Power Train Track Brake - Install
    657G Wheel Tractor-Scraper Machine Systems Roller (Ejector Carrier) - Assemble
    D7G Series 2 and D7G Series II Track-Type Tractors Transmission Oil Filter - Replace
    D6N Track-Type Tractor Hydraulic System Resolver Network - Test
    2006/07/24 Correction to Testing and Adjusting , "Transmission Pressures - Test and Adjust" {3030, 3073}
    2007/01/15 A New Speed-Timing Sensor is Available {1912}
    D6N Track-Type Tractor Hydraulic System Pressure Reducing Valve - Test and Adjust
    D7G Series 2 and D7G Series II Track-Type Tractors Transmission Oil Level - Check
    D7G Series 2 and D7G Series II Track-Type Tractors Transmission Oil Sample - Obtain
    D7G Series 2 and D7G Series II Track-Type Tractors Window Washer Reservoir - Fill - If Equipped
    D7G Series 2 and D7G Series II Track-Type Tractors Reference Material
    953D Track-Type Loader Power Train Final Drive and Sprocket - Install
    657G Wheel Tractor-Scraper Wheel Tractor Power Train Gear Pump (Transmission) - Install
    D7G Series 2 and D7G Series II Track-Type Tractors Transmission Oil - Change
    Back to top
    Contacts My AVS
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.