Final Drive and Sprocket - Install
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 1U-5230 | 手动液压泵 | 1 |
6V-8936 | 渐缩管 | 1 | |
3B-7722 | 管衬套 | 1 | |
116-1859 | 弯头 | 1 | |
B | 4C-5809 | 电动液压泵总成 | 1 |
9U-7536 | 提升台架 | 1 | |
9U-7513 | 鞍座 | 1 | |
9U-7529 | 管组件 | 1 | |
C | 128-5049 | 导向双头螺栓 | 2 |
- 将适当的起吊设备连接到终传动 (9) 和链轮上。 终传动 (9) 和链轮的组合重量约为
513 kg (1130 lb) 。 安装终传动 (9) 和链轮。 安装螺栓 (7)。 拧紧螺栓 (7) 至扭矩为570 ± 80 N·m (420 ± 60 lb ft) 。Show/hide table图 3 g01291583 - 将螺栓 (8) 安装到终传动背面。
Show/hide table
图 4 g01291581 - 拆下工具 (C),安装两个螺栓 (7)。 拧紧螺栓 (7) 至扭矩为
570 ± 80 N·m (420 ± 60 lb ft) 。Show/hide table图 5 g01297939 - 利用工具 (B) 降低机器。
Show/hide table
图 6 g01291000 - 安装左下链轮齿块 (5) 和螺栓 (6)。 拧紧螺栓 (6) 至扭矩为
100 ± 20 N·m (74 ± 15 lb ft) 。 将螺栓 (6) 再转动 1/3 圈。Show/hide table图 7 g01290999 - 安装排放塞 (4) 并向终传动注油。 请参阅操作和保养手册, "终传动机油 - 更换"。
Show/hide table
图 8 g01290998 - 从行车制动器壳体 (3) 上卸下工具 (A)。
Show/hide table
图 9 g01290997 - 安装防护装置 (2) 和 (1)。
Show/hide table
图 1 | g01291585 |
Show/hide table
图 2 | g01291584 |
结束:
- 安装履带驱动马达。 请参阅拆解和组装, "履带驱动马达 - 安装"。
- 连接履带。 请参阅拆解和组装, "履带 - 连接"。
Caterpillar Information System:
D7G Series 2 and D7G Series II Track-Type Tractors Reference Material
D7G Series 2 and D7G Series II Track-Type Tractors Window Washer Reservoir - Fill - If Equipped
D7G Series 2 and D7G Series II Track-Type Tractors Transmission Oil Sample - Obtain
D7G Series 2 and D7G Series II Track-Type Tractors Transmission Oil Level - Check
D6N Track-Type Tractor Hydraulic System Pressure Reducing Valve - Test and Adjust
2007/01/15 A New Speed-Timing Sensor is Available {1912}
2006/07/24 Correction to Testing and Adjusting , "Transmission Pressures - Test and Adjust" {3030, 3073}
D6N Track-Type Tractor Hydraulic System Resolver Network - Test
D7G Series 2 and D7G Series II Track-Type Tractors Transmission Oil Filter - Replace
D7G Series 2 and D7G Series II Track-Type Tractors Transmission Magnetic Screen - Clean
2006/08/21 A Improved Alternator Guard is Used {7310}
D7G Series 2 and D7G Series II Track-Type Tractors Track - Check/Adjust
657G Wheel Tractor-Scraper Wheel Tractor Power Train Gear Pump (Transmission) - Install
D7G Series 2 and D7G Series II Track-Type Tractors Transmission Oil - Change
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Final Drive Oil Level - Check
Failures in Hardware in VIMS ECM{7601} Failures in Hardware in VIMS ECM{7601}
D7G Series 2 and D7G Series II Track-Type Tractors Belts - Inspect/Adjust/Replace
D7G Series 2 and D7G Series II Track-Type Tractors Bulldozer Tilt Brace - Lubricate - If Equipped
657G Wheel Tractor-Scraper Machine Systems Ejector - Remove and Install
657G Wheel Tractor-Scraper Machine Systems Ejector Cylinder - Remove and Install
657G Wheel Tractor-Scraper Machine Systems Apron - Remove and Install
657G Wheel Tractor-Scraper Machine Systems Apron Cylinder - Remove and Install
2007/12/24 New Adjustment Procedure for the Piston Pump (Implement) (Steering) {4306, 5070, 5084}
325D and 329D Excavators Hydraulic System General Information