Track Drive Motor - Disassemble
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件描述 | 数量 |
A | 136-1452 | 挡圈钳组件 | 1 |
B | 8H-0663 | 轴承拉拔器总成 | 1 |
C | 1P-1863 | 挡圈钳 | 1 |
开始:
- 拆下履带驱动马达。
- 拆下止动装置 (1) 以及履带驱动马达两侧的 O 形密封圈。
Show/hide table
图 2 g01291279 - 拆卸螺栓 (2) 和头部 (3)。
Show/hide table
图 3 g01291282 Show/hide table被弹簧力爆出的零件击中,会招致人员伤害。
确保穿上所有必要的保护装备。
遵照建议的程序,并使用所有建议的工具以释放弹簧力。
- 拆下螺栓 (4) 和阀组件 (5)。
Show/hide table
图 4 g01291286 - 拆下 O 形密封圈 (6)。
Show/hide table
图 5 g01291284 - 拆下套管 (11)、弹簧 (8)、 挡圈 (9)、弹簧 (7)、挡圈 (16)、弹簧 (15)、定位销 (10)、活塞 (19)、衬套 (18)、螺母 (20)、电磁阀 (14)、螺母 (13)、销 (12) 和O 形密封圈 (17)。
Show/hide table
图 6 g01291287 - 拆下螺塞 (23)、螺塞 (22)、螺塞 (25) 和O 形密封圈。
- 卸下螺栓 (21) 和阀 (24)。
Show/hide table
图 7 g01291288 - 拆下 O 形密封圈 (26) 和螺栓 (27) 。
Show/hide table
图 8 g01291283 - 拆下配流盘 (28)。
Show/hide table
图 9 g01291289 - 拆下销 (29) 和活塞 (30) 。
Show/hide table
图 10 g01291295 Show/hide table图 11 g01291299 - 拆下 O 形密封圈 (31) 和泵筒 (32)。
- 拆下弹簧 (33) 和垫片 (34)。
Show/hide table
图 12 g01291301 - 使用工具 (A) 以便拆下挡圈 (35)。
Show/hide table
图 13 g01291304 - 拆下轴 (37 )和唇形密封 (38)。
Show/hide table
图 14 g01291307 - 拆下螺栓 (40)、板 (42)、活塞 (39) 和活塞 (41)。
Show/hide table
图 15 g01291309 - 使用工具 (C) 将挡圈 (43) 从轴 (37) 上拆下。
Show/hide table
图 16 g01291311 - 使用工具 (B)和适当的压力机从轴 (37)上拆下垫片 (44)、轴承内圈 (46)、轴承杯 、 (45)、垫片 (48)、轴承杯 (47) 和轴承杯 (49)。
Show/hide table
图 1 | g01291314 |
注: 测量尺寸 (X) 和尺寸 (Y)。 为了便于安装,记录测量尺寸。
Caterpillar Information System:
D7G Series 2 and D7G Series II Track-Type Tractors Engine Air Filter Primary Element - Clean/Replace
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Relief Valve (Torque Converter Inlet)
953D Track-Type Loader Machine Systems Tilt Cylinder - Remove and Install
953D Track-Type Loader Power Train Track Brake - Install
657G Wheel Tractor-Scraper Machine Systems Roller (Ejector Carrier) - Assemble
657G Wheel Tractor-Scraper Machine Systems Roller (Ejector Carrier) - Disassemble
657G Wheel Tractor-Scraper Machine Systems Roller (Ejector Carrier) - Install
657G Wheel Tractor-Scraper Machine Systems Roller (Ejector Carrier) - Remove
953D Track-Type Loader Power Train Track Brake - Remove
953K Track-Type Loader Power Train Final Drive and Sprocket - Disassemble
D6N Track-Type Tractor Power Train Equalizer Bar
988H and 992K Wheel Loaders and 844H and 854K Wheel Dozers Automatic Lubrication System (Electrical Actuated System) Machine Preparation for Troubleshooting
D6K Track-Type Tractor Power Train Track Drive Motor - Assemble
D7G Series 2 and D7G Series II Track-Type Tractors Engine Oil Level - Check
D7G Series 2 and D7G Series II Track-Type Tractors Engine Oil and Filter - Change
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Pressure Sensor (Automatic Lubrication)
D7G Series 2 and D7G Series II Track-Type Tractors Track - Check/Adjust
2006/08/21 A Improved Alternator Guard is Used {7310}
D7G Series 2 and D7G Series II Track-Type Tractors Transmission Magnetic Screen - Clean
D7G Series 2 and D7G Series II Track-Type Tractors Transmission Oil Filter - Replace
D6N Track-Type Tractor Hydraulic System Resolver Network - Test
2006/07/24 Correction to Testing and Adjusting , "Transmission Pressures - Test and Adjust" {3030, 3073}
2007/01/15 A New Speed-Timing Sensor is Available {1912}
D6N Track-Type Tractor Hydraulic System Pressure Reducing Valve - Test and Adjust