Track Drive Motor - Assemble
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件描述 | 数量 |
A | 136-1452 | 挡圈钳组件 | 1 |
C | 1P-1863 | 内挡圈钳 | 1 |
F | 126-7176 | 顶出螺栓 | 1 |
G | 3H-0465 | 推拉工具盘 | 4 |
H | 4C-5658 | 带螺纹的接头 | 1 |
J | 5P-7288 | 套筒 | 1 |
K | 149-4935 | 泵和马达测量工具 | 1 |
L | 8B-7548 | 推拉器工具总成 | 1 |
M | 8B-7550 | 推拉工具腿 | 2 |
N | - | Loctite 242 | 1 |
- 加热轴承内圈 (49)。
- 使用工具 (J) 将轴承内圈 (49) 安装到轴 (37) 上。
Show/hide table
图 2 g01292009 - 安装轴承外圈 (47)。
Show/hide table
图 3 g01292014 - 安装垫片 (48)。
Show/hide table
图 4 g01292016 - 安装轴承杯 (45)。
- 加热轴承内圈 (46)。
- 安装轴承内圈 (46)。
Show/hide table
图 5 g01292002 - 安装垫片 (44)。
- 使用工具 (C) 安装挡圈 (45)。
Show/hide table
图 6 g01292003 Show/hide table图 7 g01291304 Show/hide table图 8 g01291301 - 加热外壳。
- 冷却轴 (37)。
- 安装轴 (37)、唇形密封 (38) 及垫片 (36)。
- 使用工具 (A) 安装挡圈 (35)。
Show/hide table
图 9 g01292004 - 使用工具 (F)、工具 (H)、工具 (M)、工具 (G) 和工具 (L) 将轴拉入壳体。
Show/hide table
图 10 g01292005 - 安装活塞 (41)、板 (42) 和螺栓 (40)。
Show/hide table
图 11 g01292540 Show/hide table图 12 g01292542 - 将工具 (K) 安装至泵筒 (32) 内。
Show/hide table
图 13 g01292006 - 将泵筒 (32) 装在活塞 (41) 上。
Show/hide table
图 14 g01291289 - 安装活塞 (30) 和销 (29)。
Show/hide table
图 15 g01291283 - 安装配流盘 (28)。
Show/hide table
图 16 g01292011 - 安装盖 (3) 和螺栓 (2)。
- 拆卸螺栓 (2) 和头部 (3)。
Show/hide table
图 17 g01292006 - 从活塞 (41) 上拆下泵筒 (32) 。
Show/hide table
图 18 g01292559 - 测量尺寸 (Z)。
- 尺寸 (Z) 减去提升尺寸
0.32 ± 0.07 mm (0.013 ± 0.003 inch) 等于垫片厚度。Show/hide table图 19 g01292005 Show/hide table图 20 g01292013 - 拆下螺栓 (40) 和板 (42)。
- 安装活塞 (39) 和板 (42) 。
- 将工具 (A) 放在螺栓 (40) 上。
- 安装螺栓 (40)。 拧紧螺栓 (40) 至扭矩为
20 N·m (15 lb. ft.) 。 - 将弹簧 (33) 安装至活塞 (41) 内。
Show/hide table
图 21 g01292015 - 将垫片 (34) 装入泵筒 (32) 内。
Show/hide table
图 22 g01291295 - 安装泵筒 (32) 和 O 形密封圈 (31)。
Show/hide table
图 23 g01291287 - 安装 O 形密封圈 (25)、螺塞 (22) 和螺塞 (23)。
- 安装阀 (24) 和螺栓 (21)。 拧紧螺栓 (21) 至扭矩为
24 N·m (18 lb. ft.) 。Show/hide table图 24 g01291284 - 安装 O 形圈密封 (17)、销 (12)、螺母 (13)、电磁阀 (14)、螺母 (20)、衬套 (18)、活塞 (19)、定位销 (10)、弹簧 (15)、固定器 (16)、弹簧 (7)、 固定器 (9)、弹簧 (8) 和衬套 (11)。
Show/hide table
图 25 g01291286 - 安装 O 形密封圈 (6)。
Show/hide table
图 26 g01291282 Show/hide table弹簧压缩零件如果安装不当,会伤害人体。
为避免伤害,遵照出版的装配程序,并穿上保护装备。
- 安装阀组件 (5) 和螺栓 (4)。 拧紧螺栓 (4) 至扭矩为
75 N·m (55 lb ft) 。Show/hide table图 27 g01291279 - 安装盖 (3) 和螺栓 (2)。 拧紧螺栓 (2) 至扭矩为
240 ± 40 N·m (177 ± 30 lb ft) 。
Show/hide table
图 1 | g01292001 |
结束:
- 安装履带驱动马达。
Caterpillar Information System:
D6K Track-Type Tractor Power Train Track Drive Motor - Disassemble
D7G Series 2 and D7G Series II Track-Type Tractors Engine Air Filter Primary Element - Clean/Replace
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Relief Valve (Torque Converter Inlet)
953D Track-Type Loader Machine Systems Tilt Cylinder - Remove and Install
953D Track-Type Loader Power Train Track Brake - Install
657G Wheel Tractor-Scraper Machine Systems Roller (Ejector Carrier) - Assemble
657G Wheel Tractor-Scraper Machine Systems Roller (Ejector Carrier) - Disassemble
657G Wheel Tractor-Scraper Machine Systems Roller (Ejector Carrier) - Install
657G Wheel Tractor-Scraper Machine Systems Roller (Ejector Carrier) - Remove
953D Track-Type Loader Power Train Track Brake - Remove
953K Track-Type Loader Power Train Final Drive and Sprocket - Disassemble
D6N Track-Type Tractor Power Train Equalizer Bar
D7G Series 2 and D7G Series II Track-Type Tractors Engine Oil Level - Check
D7G Series 2 and D7G Series II Track-Type Tractors Engine Oil and Filter - Change
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Pressure Sensor (Automatic Lubrication)
D7G Series 2 and D7G Series II Track-Type Tractors Track - Check/Adjust
2006/08/21 A Improved Alternator Guard is Used {7310}
D7G Series 2 and D7G Series II Track-Type Tractors Transmission Magnetic Screen - Clean
D7G Series 2 and D7G Series II Track-Type Tractors Transmission Oil Filter - Replace
D6N Track-Type Tractor Hydraulic System Resolver Network - Test
2006/07/24 Correction to Testing and Adjusting , "Transmission Pressures - Test and Adjust" {3030, 3073}
2007/01/15 A New Speed-Timing Sensor is Available {1912}
D6N Track-Type Tractor Hydraulic System Pressure Reducing Valve - Test and Adjust
D7G Series 2 and D7G Series II Track-Type Tractors Transmission Oil Level - Check