Engine Oil Level - Check
Show/hide table
 |
Oli panas dan komponen-komponen yang panas dapat menyebabkan cedera. Jangan membiarkan oli panas atau komponen yang panas menyentuh kulit. |
Show/hide table
| PERHATIAN |
|---|
Jangan mengisi karter engine dengan oli secara berlebih atau kurang. Kedua kondisi ini dapat menyebabkan kerusakan engine. |
- Buka pintu akses engine di samping kiri alat berat (bila terpasang).
- Periksa dipstick (2) saat engine sedang hidup di sisi LOW IDLE WITH WARM OIL. Oli harus berada pada temperatur kerjanya. Pertahankan ketinggian oli engine antara tanda "ADD" dan tanda "FULL". Hal ini merupakan satu-satunya cara yang akurat untuk memeriksa ketinggian oli.
Periksa dipstick (2) pada sisi "ENGINE STOPPED AND COLD OIL". Oli harus berada dalam keadaan dingin. Pertahankan ketinggian oli dalam "SAFE STARTING RANGE". Metoda ini harus digunakan hanya sebagai acuan, sebelum engine dihidupkan.
Show/hide table
 | |
| Ilustrasi 1 | g01291293 |
- Lepaskan tutup pengisian oli (1). Apabila diperlukan, tambahkan oli.
Catatan: Sewaktu mengoperasikan alat berat pada bidang miring yang curam, ketinggian oli dalam karter engine harus berada pada tanda "FULL" di sisi "LOW IDLE" dari dipstick (2) .
- Bersihkan tutup pengisian oli dan pasang tutup pengisian oli.
- Tutup pintu akses engine (bila terpasang).
Caterpillar Information System:
D6K Track-Type Tractor Power Train Track Drive Motor - Assemble
D6K Track-Type Tractor Power Train Track Drive Motor - Disassemble
D7G Series 2 and D7G Series II Track-Type Tractors Engine Air Filter Primary Element - Clean/Replace
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Relief Valve (Torque Converter Inlet)
953D Track-Type Loader Machine Systems Tilt Cylinder - Remove and Install
953D Track-Type Loader Power Train Track Brake - Install
657G Wheel Tractor-Scraper Machine Systems Roller (Ejector Carrier) - Assemble
657G Wheel Tractor-Scraper Machine Systems Roller (Ejector Carrier) - Disassemble
657G Wheel Tractor-Scraper Machine Systems Roller (Ejector Carrier) - Install
657G Wheel Tractor-Scraper Machine Systems Roller (Ejector Carrier) - Remove
953D Track-Type Loader Power Train Track Brake - Remove
953K Track-Type Loader Power Train Final Drive and Sprocket - Disassemble
D7G Series 2 and D7G Series II Track-Type Tractors Engine Oil and Filter - Change
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Pressure Sensor (Automatic Lubrication)
D7G Series 2 and D7G Series II Track-Type Tractors Track - Check/Adjust
2006/08/21 A Improved Alternator Guard is Used {7310}
D7G Series 2 and D7G Series II Track-Type Tractors Transmission Magnetic Screen - Clean
D7G Series 2 and D7G Series II Track-Type Tractors Transmission Oil Filter - Replace
D6N Track-Type Tractor Hydraulic System Resolver Network - Test
2006/07/24 Correction to Testing and Adjusting , "Transmission Pressures - Test and Adjust" {3030, 3073}
2007/01/15 A New Speed-Timing Sensor is Available {1912}
D6N Track-Type Tractor Hydraulic System Pressure Reducing Valve - Test and Adjust
D7G Series 2 and D7G Series II Track-Type Tractors Transmission Oil Level - Check
D7G Series 2 and D7G Series II Track-Type Tractors Transmission Oil Sample - Obtain