Parking Brake Actuator - Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 155-3597 | Wheel Chock | 4 |
- Install parking brake actuator (4) and nuts (5). Tighten nuts (5) to a torque of
50 ± 10 N·m (37 ± 7 lb ft) . - Connect rod (8) to parking brake actuator (4) by turning nut (6) counterclockwise.
- Tighten nut (7).
Show/hide table
Illustration 2 g01275565 - Connect hose assembly (3) to parking brake actuator (4).
- Adjust the parking brake actuator. Refer to Testing and Adjusting, "Parking Brake Actuator - Adjust".
Show/hide table
Illustration 3 g01275564 - Install step (2) and cover (1).
- Remove Tooling (A) from the rear wheels.
Show/hide table
Illustration 1 | g01275567 |
End By:
- Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
525C, 535C and 545C Wheel Skidders Power Train Parking Brake Actuator - Remove
D7R Series II Track-Type Tractor Power Train Oil Filter and Base (Power Train) - Install
525C, 535C and 545C Wheel Skidders Power Train Parking Brake - Install
525C, 535C and 545C Wheel Skidders Power Train Parking Brake - Remove
D7R Series II Track-Type Tractor Power Train Oil Filter and Base (Power Train) - Assemble
D7R Series II Track-Type Tractor Power Train Oil Filter and Base (Power Train) - Disassemble
AccuGrade® GPS (CD700) Glossary
AccuGrade® GPS (CD700) Troubleshooting Techniques
AccuGrade® GPS (CD700) End User License Agreement
AccuGrade® GPS (CD700) Machine Symbols
AccuGrade® GPS (CD700) Full Screen Messages
AccuGrade® GPS (CD700) Flashing Messages
525C, 535C and 545C Wheel Skidders Power Train Torque Converter from Transmission - Separate
525C, 535C and 545C Wheel Skidders Power Train Torque Converter to Transmission - Connect
854K Wheel Dozer Hydraulic System Oil Level (Implement) (Hydraulic Fan) - Check
854K Wheel Dozer Hydraulic System Oil Level (Steering) (Brake) - Check
525C, 535C and 545C Wheel Skidders Power Train Bottom Guard (Engine) - Remove and Install
525C, 535C and 545C Wheel Skidders Power Train Bottom Guard (Transmission) - Remove and Install
854K Wheel Dozer Hydraulic Tank Breaker Relief Valve - Clean
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Clutch (Reverse, Second)
D3K, D4K and D5K Track-Type Tractors Fuel System Water Separator - Drain
D5R Track-Type Tractor Hydraulic System Lift Cylinder (Bulldozer)
D3K, D4K and D5K Track-Type Tractors Cooling System Water Temperature Regulator - Clean/Replace
525C, 535C and 545C Wheel Skidders Machine Systems Piston Pump (Implement, Steering, Brake) - Remove