Lift Cylinder (Bulldozer)
Show/hide table
Illustration 1 | g02793125 |
Show/hide table
Specification for 110-3269 Bulldozer Lift Cylinder Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 1     | 167-2200 Seal As     | Lubricate sealing lip lightly with the lubricant being sealed.     |
2     | 1     | 167-2307 U-Cup Seal     | Lubricate sealing lip lightly with the lubricant being sealed.     |
3     | 1     | 231-3538 Wiper Seal     | Lubricate sealing lip lightly with the lubricant being sealed.     |
4     | 1     | -     | Apply green Loctite 609 to the wiper seal groove before assembly.     |
5     | 2     | 6E-5449 Bearing     | Bore of the bushing before assembly is 44.474 ± 0.020 mm (1.7509 ± 0.0008 inch).     |
6     | 1     | 173-9683 Bolt     | Torque to 1800 ± 200 N·m (1328 ± 148 lb ft).     |
7     | 1     | 6E-3570 Head     | Bore of the head over four lands is 57.48 ± 0.03 mm (2.263 ± 0.001 inch).     |
Lubricate the threads with clean grease. | |||
Torque to 600 ± 130 N·m (443 ± 96 lb ft) |
|||
A     | 1     | 110-3270 Cylinder As     | Bore of the cylinder assembly is 114.30 ± 0.08 mm (4.500 ± 0.003 inch).     |
B     | 1     | 110-3271 Rod As     | Diameter of the rod is 57.100 ± 0.038 mm (2.2480 ± 0.0015 inch).     |
Caterpillar Information System:
D3K, D4K and D5K Track-Type Tractors Fuel System Water Separator - Drain
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Clutch (Reverse, Second)
854K Wheel Dozer Hydraulic Tank Breaker Relief Valve - Clean
525C, 535C and 545C Wheel Skidders Power Train Bottom Guard (Transmission) - Remove and Install
525C, 535C and 545C Wheel Skidders Power Train Bottom Guard (Engine) - Remove and Install
854K Wheel Dozer Hydraulic System Oil Level (Steering) (Brake) - Check
854K Wheel Dozer Hydraulic System Oil Level (Implement) (Hydraulic Fan) - Check
525C, 535C and 545C Wheel Skidders Power Train Torque Converter to Transmission - Connect
525C, 535C and 545C Wheel Skidders Power Train Torque Converter from Transmission - Separate
525C, 535C and 545C Wheel Skidders Power Train Parking Brake Actuator - Install
525C, 535C and 545C Wheel Skidders Power Train Parking Brake Actuator - Remove
D7R Series II Track-Type Tractor Power Train Oil Filter and Base (Power Train) - Install
D3K, D4K and D5K Track-Type Tractors Cooling System Water Temperature Regulator - Clean/Replace
525C, 535C and 545C Wheel Skidders Machine Systems Piston Pump (Implement, Steering, Brake) - Remove
525C, 535C and 545C Wheel Skidders Machine Systems Piston Pump (Implement, Steering, Brake) - Install
Troubleshooting the Fuel Injection System For 3054 and 3056 Engines {1251, 1252} Troubleshooting the Fuel Injection System For 3054 and 3056 Engines {1251, 1252}
525C, 535C and 545C Wheel Skidders Machine Systems Gear Pump (Pilot) - Remove
525C, 535C and 545C Wheel Skidders Machine Systems Gear Pump (Pilot) - Install
525C, 535C and 545C Wheel Skidders Machine Systems Steering Wheel - Remove and Install
525C, 535C and 545C Wheel Skidders Machine Systems Boom Cylinder - Remove and Install
525C, 535C and 545C Wheel Skidders Machine Systems Lift Cylinder (Decking Blade) - Remove and Install
854K Wheel Dozer Lift Cylinder Yoke Bearings - Lubricate
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Clutch (First, Third)
854K Wheel Dozer Tilt Cylinder Bearings - Lubricate